Edificación
293 productos en total
Desde estructuras de obra civil y acabados hasta suministro de agua y saneamiento y protección contra incendios, electricidad de potencia, ventilación y climatización, automatización de edificios y equipos de ascensores, cubriendo el suministro de materiales y equipos para todo el ciclo de proyectos de edificación.
Interior Decoration Plywood
Spec: JAS GP OP (G1/G2) Glue: T1 Melamine / T2 Urea Formaldehyde: F☆☆☆☆ Size: 910×1820mm, 1230×2440mm
Structural Plywood
Spec: JAS SP (C2) Glue: TS Phenolic Formaldehyde: F☆☆☆☆ Size: 910×1820mm, 1230×2440mm
Floorbase Plywood
Spec: Floor Base Glue: Phenolic / Melamine Formaldehyde: F☆☆☆☆ / F☆☆☆ Size: 945×1840mm, 1230×2440mm
Wood Flooring
Patterns: walnut, oak, grey tones and more Size: standard project sizes, customization available Surface: wear-resistant coating
Decorative Board - Wood Grain
Substrate: plywood Finish: wood-grain impregnated paper / PVC Size: 1230×2440mm standard, customization available
Decorative Board - Marble Grain
Substrate: plywood Finish: marble-grain high-gloss / matte Size: 1230×2440mm standard, customization available
Decorative Board - Custom Print
Substrate: plywood Process: high-definition printing Pattern: customized from client artwork Size: project-based customization
CHI-DE Executive Desk
Series: CHICO Configuration: Executive desk with side return Available sizes (mm): 2100W×1850D×750H; 2300W×1850D×750H; 2500W×1850D×750H Materials: MFC panels, powder-coated steel frame Source model: CHI-DE Full specification: Available on request
CHI-DD Executive Desk
Series: CHICO Configuration: Executive desk with side cabinet Available sizes (mm): 1800W×1400D×750H Materials: MFC panels, powder-coated steel frame Source model: CHI-DD Full specification: Available on request
CHI-DC Executive Desk
Series: CHICO Configuration: Executive desk with mobile pedestal Available sizes (mm): 1500W×1800D×750H; 1600W×1850D×750H; 1700W×1900D×750H; 1800W×1900D×750H; 2000W×2000D×750H Materials: MFC panels, powder-coated steel frame Source model: CHI-DC Full specification: Available on request
CHI-CTA-A3 Conference Table
Series: CHICO Configuration: Boardroom conference table Available sizes (mm): 4200W×1400D×750H; 4500W×1400D×750H; 4800W×1400D×750H; 5400W×1400D×750H Materials: MFC panels, powder-coated steel frame Source model: CHI-CTA-A3 Full specification: Available on request
CHI-CTB-A2 Conference Table
Series: CHICO Configuration: Conference table with steel leg frame Available sizes (mm): 2400W×1400D×750H; 2800W×1500D×750H; 3000W×1500D×750H; 3200W×1500D×750H Materials: MFC panels, powder-coated steel frame Source model: CHI-CTB-A2 Full specification: Available on request
SF-801 Executive Sofa
Series: Executive Management Sofa Configuration: 1/2/3-seater executive sofa group Available sizes (mm): 1S 880W×800D×780H; 2S 1540W×800D×780H; 3S 1940W×800D×780H Materials: Leather upholstery, high-density foam, solid wood inner frame, metal feet Source model: SF-801 Full specification: Available on request
SF-802 Executive Sofa
Series: Executive Management Sofa Configuration: 1/2/3-seater executive sofa group Available sizes (mm): 1S 880W×830D×800H; 2S 1400W×830D×800H; 3S 1950W×830D×800H Materials: Leather upholstery, high-density foam, solid wood inner frame, metal feet Source model: SF-802 Full specification: Available on request
SF-803 Executive Sofa
Series: Executive Management Sofa Configuration: 1/2/3-seater executive sofa group Available sizes (mm): 1S 960W×860D×830H; 2S/3S 2010W×860D×830H (as printed) Materials: Leather upholstery, high-density foam, solid wood inner frame, metal feet Source model: SF-803 Full specification: Available on request
SF-804 Executive Sofa
Series: Executive Management Sofa Configuration: 1/3-seater executive sofa group Available sizes (mm): 1S 800W×780D×800H; 3S 2050W×780D×800H Materials: Leather upholstery, high-density foam, solid wood inner frame, metal feet Source model: SF-804 Full specification: Available on request
SF-805 Executive Sofa
Series: Executive Management Sofa Configuration: 1/3-seater executive sofa group Available sizes (mm): 1S 800W×780D×800H; 3S 2050W×780D×800H Materials: Leather upholstery, high-density foam, solid wood inner frame, metal feet Source model: SF-805 Full specification: Available on request
CLE-CA1812 File Cabinet
Series: CLEVER Configuration: Low file cabinet with mixed open and closed storage Available sizes (mm): 1800W×450D×1200H Materials: MFC panels Source model: CLE-CA1812 Full specification: Available on request
CLE-CA2212 File Cabinet
Series: CLEVER Configuration: Low file cabinet with sliding doors and open shelves Available sizes (mm): 2200W×450D×1200H Materials: MFC panels Source model: CLE-CA2212 Full specification: Available on request
CLE-CB2418 Tall File Cabinet
Series: CLEVER Configuration: Tall file cabinet with mixed open and closed storage Available sizes (mm): 2400W×450D×1800H Materials: MFC panels Source model: CLE-CB2418 Full specification: Available on request
CAB-OFFICE Office Cabinet
Series: OFFICE CABINET Configuration: Steel office storage cabinet range (low cabinets, wardrobes, lockers); no model number in catalog Available sizes (mm): Project sizes available on request Materials: Powder-coated steel Source model: CAB-OFFICE Full specification: Available on request
MHA0406 Mobile Pedestal
Series: OFFICE CABINET Configuration: 3-drawer mobile pedestal with accent handles, silent casters Available sizes (mm): 400W×460D×630H Materials: Powder-coated steel Source model: MHA0406 Full specification: Available on request
CHI-WTA-A2 Workstation
Series: CHICO Configuration: 2-person workstation with desk screens and mobile pedestals Available sizes (mm): 2400W×600D×750H; 2800W×650D×750H; 2800W×700D×750H; 3000W×700D×750H; 3200W×750D×750H Materials: MFC panels, powder-coated steel frame Source model: CHI-WTA-A2 Full specification: Available on request
CHI-WTB-A4 Workstation
Series: CHICO Configuration: 4-person workstation with desk screens Available sizes (mm): 2400W×1200D×750H; 2800W×1300D×750H; 2800W×1400D×750H; 3000W×1400D×750H; 3200W×1500D×750H Materials: MFC panels, powder-coated steel frame Source model: CHI-WTB-A4 Full specification: Available on request
CHI-WTF Workstation
Series: CHICO Configuration: Linear workstation cluster with fabric screens Available sizes (mm): WTF-A1: 1400W×650/700D×750H, 1500W×700D×750H, 1600W×750D×750H; WTF-A2: 1400W×1300/1400D×750H, 1500W×1400D×750H, 1600W×1500D×750H Materials: MFC panels, powder-coated steel frame Source model: CHI-WTF Full specification: Available on request
CHI-WTD-AL4 Workstation
Series: CHICO Configuration: L-shape 4-person workstation Available sizes (mm): 2800W×2800D×750H; 3000W×3000D×750H; 3200W×3200D×750H Materials: MFC panels, powder-coated steel frame Source model: CHI-WTD-AL4 Full specification: Available on request
KIL-A-WTB-A4 Workstation
Series: KILTER Configuration: 4-person workstation with desk screens Available sizes (mm): Project sizes available on request Materials: MFC panels, powder-coated steel frame Source model: KIL-A-WTB-A4 Full specification: Available on request
H-29AF Executive Leather Chair
Series: Leather Chair Series Configuration: High-back executive swivel chair, tilt mechanism, five-star base Available sizes (mm): Project sizes available on request Materials: Leather upholstery, polished aluminum five-star base, PU castors Source model: H-29AF Full specification: Available on request
M-29AF Leather Task Chair
Series: Leather Chair Series Configuration: Mid-back swivel chair, tilt mechanism, five-star base Available sizes (mm): Project sizes available on request Materials: Leather upholstery, polished aluminum five-star base, PU castors Source model: M-29AF Full specification: Available on request
H-02AF Executive Leather Chair
Series: Leather Chair Series Configuration: High-back executive swivel chair, tilt mechanism, five-star base Available sizes (mm): Project sizes available on request Materials: Leather upholstery, polished aluminum five-star base, PU castors Source model: H-02AF Full specification: Available on request
M-02AF Leather Task Chair
Series: Leather Chair Series Configuration: Mid-back swivel chair, tilt mechanism, five-star base Available sizes (mm): Project sizes available on request Materials: Leather upholstery, polished aluminum five-star base, PU castors Source model: M-02AF Full specification: Available on request
H-01AF Executive Leather Chair
Series: Leather Chair Series Configuration: High-back executive swivel chair, tilt mechanism, five-star base Available sizes (mm): Project sizes available on request Materials: Leather upholstery, polished aluminum five-star base, PU castors Source model: H-01AF Full specification: Available on request
WRIE-W01 Screen Workstation
Series: WRIE Configuration: L-shape 4-person screen workstation cluster with mobile pedestals Available sizes (mm): Modular system — screen W: 600/1200/1400/1500/1600; screen H: 900/1050/1100/1200 (45/60 screens also 1400/1600); desk height 725. Project sizes available on request Materials: Aluminum-framed fabric/PET screens, MFC worktops, steel or solid wood legs Source model: WRIE-W01 Full specification: Available on request
WRIE-W02 Screen Workstation
Series: WRIE Configuration: X-shape 6-person screen workstation cluster Available sizes (mm): Modular system — screen W: 600/1200/1400/1500/1600; screen H: 900/1050/1100/1200 (45/60 screens also 1400/1600); desk height 725. Project sizes available on request Materials: Aluminum-framed fabric/PET screens, MFC worktops, steel or solid wood legs Source model: WRIE-W02 Full specification: Available on request
WRIE-W03 Screen Workstation
Series: WRIE Configuration: Screen workstation with overhead storage cabinets and integrated power Available sizes (mm): Modular system — screen W: 600/1200/1400/1500/1600; screen H: 900/1050/1100/1200 (45/60 screens also 1400/1600); desk height 725. Project sizes available on request Materials: Aluminum-framed fabric/PET screens, MFC worktops, steel or solid wood legs Source model: WRIE-W03 Full specification: Available on request
WRIE-W04 Screen Workstation
Series: WRIE Configuration: Linear 3-person bench workstation with fabric screens Available sizes (mm): Modular system — screen W: 600/1200/1400/1500/1600; screen H: 900/1050/1100/1200 (45/60 screens also 1400/1600); desk height 725. Project sizes available on request Materials: Aluminum-framed fabric/PET screens, MFC worktops, steel or solid wood legs Source model: WRIE-W04 Full specification: Available on request
WRIE-W05 Screen Workstation
Series: WRIE Configuration: Cross 4-person screen workstation Available sizes (mm): Modular system — screen W: 600/1200/1400/1500/1600; screen H: 900/1050/1100/1200 (45/60 screens also 1400/1600); desk height 725. Project sizes available on request Materials: Aluminum-framed fabric/PET screens, MFC worktops, steel or solid wood legs Source model: WRIE-W05 Full specification: Available on request
PVC-U Drainage Pipe (dn110)
Material: rigid PVC-U Common size: dn110×3.2 mm (full series dn50–dn200) Length: 5.8m Properties: Vicat ≥79℃, TIR ≤10%, longitudinal reversion ≤5% Joint: solvent-cement socket
PVC-U Drainage Fittings
Material: rigid PVC-U Common sizes: dn50 / dn75 / dn110 / dn160 Range: tees, elbows, P-traps, S-traps, inspection ports, floor drains Joint: solvent-cement socket
PP-R Hot & Cold Water Pipe
Material: random copolymer polypropylene (PP-R) Pressure ratings: PN1.25 / PN1.6 / PN2.0 / PN2.5 MPa Sizes: dn16–dn200 mm Length: 4m straight; coil d16–d32 Standards: ISO 15874-2 / EN ISO 15874-2 / GB/T 18742.2 Color: grey (blue stripe cold / red stripe hot)
PVC Flame-Retardant Electrical Conduit
Standards: IEC 614 / IEC 61386-1 / IEC 61386-21 / AS/NZS 2053.2 Color: white (customizable) Properties: 25kV breakdown resistance, flame-retardant self-extinguishing, corrosion and insect resistant Installation: cold bending, solvent-cement joints
PVC Trunking
Standard: IEC 61084-2-1 Color: white (customizable) Properties: 25kV insulation, flame-retardant self-extinguishing, impact and corrosion resistant Applications: surface LV/ELV wiring protection and management
PVC-U Drainage Pipe (dn50)
Material: rigid PVC-U Size: dn50 x 3.0 mm Length: 5.8m Standards: ISO 3633 / GB/T 5836.1 Joint: solvent-cement socket
PVC-U Drainage Pipe (dn75)
Material: rigid PVC-U Size: dn75 x 3.0 mm Length: 5.8m Standards: ISO 3633 / GB/T 5836.1 Joint: solvent-cement socket
PVC-U Drainage Pipe (dn160)
Material: rigid PVC-U Size: dn160 x 3.2 mm Length: 5.8m Standards: ISO 3633 / GB/T 5836.1 Joint: solvent-cement socket
PVC-U Drainage Pipe (dn200)
Material: rigid PVC-U Size: dn200 x 3.9 mm Length: 5.8m Standards: ISO 3633 / GB/T 5836.1 Joint: solvent-cement socket
PVC-U Drainage Pressure Pipe (dn110)
Material: rigid PVC-U Size: dn110 x 4.0 mm Length: 5.8m Pressure-rated for pressurised and high-rise drainage Standards: ISO 3633 / GB/T 5836.1 Joint: solvent-cement socket
PVC-U Drainage Pressure Pipe (dn160)
Material: rigid PVC-U Size: dn160 x 5.0 mm Length: 5.8m Pressure-rated for pressurised and high-rise drainage Standards: ISO 3633 / GB/T 5836.1 Joint: solvent-cement socket
PVC-U Drainage Pressure Pipe (dn200)
Material: rigid PVC-U Size: dn200 x 6.0 mm Length: 5.8m Pressure-rated for pressurised and high-rise drainage Standards: ISO 3633 / GB/T 5836.1 Joint: solvent-cement socket
PVC-U Drainage Pressure Pipe (dn250)
Material: rigid PVC-U Size: dn250 x 8.0 mm Length: 5.8m Pressure-rated for pressurised and high-rise drainage Standards: ISO 3633 / GB/T 5836.1 Joint: solvent-cement socket
PVC-U Drainage Pipe (Belled End) (dn160)
Material: rigid PVC-U Size: dn160 x 4.0 mm Length: 5.8m Standards: ISO 3633 / GB/T 5836.1 Joint: solvent-cement socket
PVC-U Drainage Pipe (Belled End) (dn200)
Material: rigid PVC-U Size: dn200 x 4.9 mm Length: 5.8m Standards: ISO 3633 / GB/T 5836.1 Joint: solvent-cement socket
PVC-U Drainage Pipe (Belled End) (dn315)
Material: rigid PVC-U Size: dn315 x 7.7 mm Length: 5.8m Standards: ISO 3633 / GB/T 5836.1 Joint: solvent-cement socket
PVC-U Spiral Drainage Pipe (dn75)
Material: rigid PVC-U Size: dn75 x 2.3 mm Length: 5.8m Standards: ISO 3633 / GB/T 5836.1 Joint: solvent-cement socket
PVC-U Spiral Drainage Pipe (dn110)
Material: rigid PVC-U Size: dn110 x 3.2 mm Length: 5.8m Standards: ISO 3633 / GB/T 5836.1 Joint: solvent-cement socket
PVC-U Spiral Drainage Pipe (dn160)
Material: rigid PVC-U Size: dn160 x 4.0 mm Length: 5.8m Standards: ISO 3633 / GB/T 5836.1 Joint: solvent-cement socket
PVC-U Structured-wall Inner-spiral Drainage Pipe (dn110)
Material: rigid PVC-U Size: dn110 x 5.0 mm Length: 5.8m Standards: ISO 3633 / GB/T 5836.1 Joint: solvent-cement socket
PVC-U Structured-wall Inner-spiral Drainage Pipe (dn160)
Material: rigid PVC-U Size: dn160 x 6.0 mm Length: 5.8m Standards: ISO 3633 / GB/T 5836.1 Joint: solvent-cement socket
PVC-U Solid-wall Inner-spiral Drainage Pipe (dn110)
Material: rigid PVC-U Size: dn110 x 3.2 mm Length: 5.8m Standards: ISO 3633 / GB/T 5836.1 Joint: solvent-cement socket
PVC-U Hollow Spiral Drainage Pipe (dn110)
Material: rigid PVC-U Size: dn110 x 3.8 mm Length: 5.8m Standards: ISO 3633 / GB/T 5836.1 Joint: solvent-cement socket
PVC-U Rain Gutter
Material: rigid PVC-U Sizes: 75x1.4 / 110x1.6 / 160x1.9 mm Length: 4m (other lengths on request) Color: white (customizable) Accessories: drop outlet, connector, 90° corner, end cap
PVC-U Half-round Rain Gutter
Material: rigid PVC-U Sizes: 75x1.5 / 110x1.8 / 160x2.2 mm Length: 4m (other lengths on request) Color: white (customizable)
PVC-U Rain Gutter Drop Outlet
Material: rigid PVC-U Sizes: 75 / 110 / 160 mm Installation: snap-on
PVC-U Gutter Connector
Material: rigid PVC-U Sizes: 75 / 110 / 160 mm Installation: snap-on
PVC-U Gutter End Cap
Material: rigid PVC-U Sizes: 75 / 110 / 160 mm
PVC-U Gutter 90° Corner
Material: rigid PVC-U Sizes: 75 / 110 / 160 mm Types: inside / outside corner, with or without rubber seal
Bicolor PP-R Water Pipe (Grey Inside, White Outside)
Sizes dn20-dn63, PN1.25/1.6/2.0/2.5 MPa (S5/S4/S3.2/S2.5); opaque grey inner layer with white outer layer, other inside colors (green/blue/orange) available on request; socket or electro fusion; long-term working temperature 70 C, max transient 95 C. Standards: GB/T 18742.1/.2/.3, GB/T 17219
PP-R/Glass Fiber Reinforced Pipe
Sizes dn20-dn32, PN1.6 MPa (S3.2) / PN2.0 MPa (S2.5); three-layer structure with glass-fiber reinforced PP-R middle layer; white or grey interior/exterior with red middle layer; pipe length generally 3m or 4m (other lengths customizable); max temperature 95 C, long-term operating 80 C; linear expansion coefficient 0.067 mm/(m-K). Standards: CJ/T 258, ISO 15874, GOST 32415
PP-R Coupling (Soc x Soc)
Sizes dn16-dn200 (dn200 in SDR54), PN2.5 MPa (dn16-160) / PN1.6 MPa (dn200), hot-melt socket fusion joint; light grey or white. Standards: ISO 15874-3 / EN ISO 15874-3, DIN 16962, GB/T 18742.3
PP-R Reducer (Soc x Soc)
Reducing sizes dn20x16 to dn200x160 (dn200x160 in SDR54), PN2.5 MPa (dn16-160) / PN1.6 MPa (dn200), hot-melt socket fusion joint; light grey or white. Standards: ISO 15874-3 / EN ISO 15874-3, DIN 16962, GB/T 18742.3
PP-R 90° Elbow (Soc x Soc)
Sizes dn16-dn200 (dn200 in SDR54), PN2.5 MPa (dn16-160) / PN1.6 MPa (dn200), hot-melt socket fusion joint; light grey or white. Standards: ISO 15874-3 / EN ISO 15874-3, DIN 16962, GB/T 18742.3
PP-R 90° Reducing Elbow (Soc x Soc)
Reducing sizes dn25x20 to dn63x50, PN2.5 MPa, hot-melt socket fusion joint; light grey or white. Standards: ISO 15874-3 / EN ISO 15874-3, DIN 16962, GB/T 18742.3
PP-R 45° Elbow (Soc x Soc)
Sizes dn16-dn200 (dn200 in SDR54), PN2.5 MPa (dn16-160) / PN1.6 MPa (dn200), hot-melt socket fusion joint; light grey or white. Standards: ISO 15874-3 / EN ISO 15874-3, DIN 16962, GB/T 18742.3
PP-R Tee (Soc x Soc x Soc)
Sizes dn16-dn200 (dn200 in SDR54), PN2.5 MPa (dn16-160) / PN1.6 MPa (dn200), hot-melt socket fusion joint; light grey or white. Standards: ISO 15874-3 / EN ISO 15874-3, DIN 16962, GB/T 18742.3
PP-R Reducing Tee (Soc x Soc x Soc)
Reducing sizes dn20x16 to dn160x110, PN2.5 MPa, hot-melt socket fusion joint; light grey or white. Standards: ISO 15874-3 / EN ISO 15874-3, DIN 16962, GB/T 18742.3
PP-R Cap (Soc)
Sizes dn16-dn160, PN2.5 MPa, hot-melt socket fusion joint; light grey or white. Standards: ISO 15874-3 / EN ISO 15874-3, DIN 16962, GB/T 18742.3
PP-R Female Thread Adapter with Metal Insert (Soc x Fipt)
Sizes dn16x1/2" to dn75x2-1/2", PN2.5 MPa, socket fusion x female iron pipe thread with brass/metal insert; light grey or white. Standards: ISO 15874-3 / EN ISO 15874-3, DIN 16962, GB/T 18742.3
PP-R Male Thread Adapter with Metal Insert (Soc x Mipt)
Sizes dn16x1/2" to dn75x2", PN2.5 MPa, socket fusion x male iron pipe thread with brass/metal insert; light grey or white. Standards: ISO 15874-3 / EN ISO 15874-3, DIN 16962, GB/T 18742.3
PP-R Female Thread Elbow with Metal Insert (Soc x Fipt)
Sizes dn16x1/2" to dn75x2-1/2", PN2.5 MPa, 90° elbow, socket fusion x female iron pipe thread with brass/metal insert; light grey or white. Standards: ISO 15874-3 / EN ISO 15874-3, DIN 16962, GB/T 18742.3
PP-R Male Thread Elbow with Metal Insert (Soc x Mipt)
Sizes dn16x1/2" to dn75x2-1/2", PN2.5 MPa, 90° elbow, socket fusion x male iron pipe thread with brass/metal insert; light grey or white. Standards: ISO 15874-3 / EN ISO 15874-3, DIN 16962, GB/T 18742.3
PP-R Union (Soc x Soc)
Sizes dn20-dn40, PN2.5 MPa, detachable union with O-ring seal, hot-melt socket fusion joint; light grey or white. Standards: ISO 15874-3 / EN ISO 15874-3, DIN 16962, GB/T 18742.3
PP-R Ball Valve (Copper Core)
Sizes dn20-dn63, PN2.0 MPa, double socket fusion ends, brass (copper) core; available in white, green and blue (other colors customizable). Standards: ISO 15874-3 / EN ISO 15874-3, DIN 16962, GB/T 18742.3
PP-R Stop Valve (Soc x Soc)
Sizes dn20-dn110, PN2.5 MPa, double socket fusion ends with rising-stem handwheel (stop/globe valve); light grey or white. Standards: ISO 15874-3 / EN ISO 15874-3, DIN 16962, GB/T 18742.3
PP-R Check Valve (Non-Return)
Sizes dn20-dn32, PN2.5 MPa, double socket fusion ends, spring check valve with flow-direction arrow; light grey or white. Standards: ISO 15874-3 / EN ISO 15874-3, DIN 16962, GB/T 18742.3
PVC Electrical Conduit dn16–dn25 (Heavy/Medium Duty)
dn16–dn25 rigid PVC conduit: Grade A (heavy duty) wall 1.5/1.8/2.0mm, Grade B (medium duty) wall 1.3/1.5/1.6mm; 2.9m length, plain or belled end; white, other colors on request; flame-retardant, insulating.
PVC Electrical Conduit dn32–dn50 (Heavy/Medium Duty)
dn32–dn50 rigid PVC conduit: Grade A (heavy duty) wall 2.2/2.4/2.6mm, Grade B (medium duty) wall 1.9/2.0/2.2mm; 2.9m length, plain or belled end; white, other colors on request; flame-retardant, insulating.
PVC Air-condition Duct 70×56–100×70
PVC air-condition duct: 70×56 (wall 1.5mm), 80×65 (1.7mm), 100×70 (2.0mm); 2m or 4m lengths, white; protects outdoor refrigerant pipes against UV radiation, impact and weather, service temperature -40℃~+60℃; with couplings, 45°/90° elbows, inside/outside corners and hole covers.
Flame-retardant Insulated PVC Triangular Trunking 20×20/30×30
Triangular-section PVC trunking, 20×20 (W30.8×H17.8mm) and 30×30 (W45.6×H28mm), 2m or 4m lengths; snap-on cover and base, quick-plug fittings; lead-free calcium-zinc formula; white, custom colors and embossed patterns on request; capacity 8 pcs CAT-5 (20×20) / 20 pcs (30×30).
PVC Conduit Coupling & Adapter dn16–dn60
Straight couplings (dn16–dn60), male adapters, change unions and quick-connect adapters for rigid and corrugated PVC conduit; solvent-cement or threaded connection; white PVC.
PVC Conduit Elbows & Tees dn16–dn60
45° and 90° elbows, 90° long-sweep bends and tees for PVC conduit (dn16–dn60; long sweep dn16–dn50); plain or with inspection cover (elbow/tee with cover, dn16–dn50); white PVC.
PVC Conduit Clamp dn16–dn50
Conduit fixing clamps: saddle clamp, assembling clamp, U-style, double-U, hook and side-entry types; dn16–dn50; white PVC, screw or nail fixing.
PVC Round Type Wiring Duct 20×6–70×15
D-section (round type) PVC wiring duct, 20×6 to 70×15mm, 2m length; white or grey, other colors on request; for floor and wall cable routing in stages, hotels, exhibition halls, computer rooms and workshops; fixed with high-tack double-faced adhesive; with separable 45°/90° elbows, tees, couplings, transitions and end caps.
PVC Multifunctional Trunking 105×50
Multifunctional PVC trunking 105×50mm, wall thickness 2.5mm, 4m length, white; snap-lock base and cover, divider version available; withstands 2500V voltage, oxygen index ≥32, FV-0 vertical burning grade; for surface power and communication wiring with panel sockets.
PVC Trunking Coupling & Reducer 24×14–200×100
Plain and cassette couplings plus size reducers for PVC trunking, matching trunking sizes 24×14 to 200×100mm; white PVC.
PVC Trunking Angles 20×10–200×100
Internal (concave), external (convex), flat and box-style 90° angles for PVC trunking, sizes 20×10 to 200×100mm (box-style to 60×40); white PVC.
PVC Trunking Tees & Crosses 20×10–200×100
Flat tees in sizes 20×10 to 200×100mm; angle flat tees, left/right flat tees, middle-to-big/small tees and cassette crosses in 20×10 to 60×40mm; white PVC.
PVC Trunking Stop End 24×14–200×100
Stop ends (end caps) for PVC trunking, sizes 24×14 to 200×100mm; plain, with cover or with reserved hole (80×40, 80×50); white PVC.
PVC-U Coupling (Socket x Socket)
Material: rigid PVC-U Sizes: 32 / 40 / 50 / 75 / 110 / 125 / 160 / 200 / 250 / 315 / 400 / 500 mm Joint: solvent-cement socket 12 sizes dn32-dn500; two drawings in catalog (dn32~dn200 / >=dn250)
PVC-U 45° Elbow with Cleanout (Socket x Socket x Male Thread)
Material: rigid PVC-U Sizes: 50 / 75 / 110 / 125 / 160 / 200 / 250 / 315 / 400 mm Joint: solvent-cement socket x male thread cleanout with inspection plug (MPT)
PVC-U Sanitary Tee (Socket x Socket x Socket)
Material: rigid PVC-U Sizes: 32 / 40 / 50 / 75 / 110 / 125 / 160 / 200 / 250 / 315 / 400 / 500 mm Joint: solvent-cement socket 12 sizes dn32-dn500
PVC-U Wye (Socket x Socket x Socket)
Material: rigid PVC-U Sizes: 32 / 40 / 50 / 75 / 110 / 125 / 160 / 200 / 250 / 315 mm Joint: solvent-cement socket 11 sizes dn32-dn315 (no dn400/500)
PVC-U Trap with Cleanout (Socket x Spigot x Male Thread)
Material: rigid PVC-U Sizes: 50 / 75 / 110 / 125 / 160 mm Joint: solvent-cement socket x spigot x male thread cleanout with cleanout plug; variant 'Trap with Cleanout (SocxSocxMpt)' on p17 adds dn200 (50-200, 6 sizes)
PVC-U S Trap (Socket x Socket)
Material: rigid PVC-U Sizes: 50 / 75 / 110 / 160 mm Joint: solvent-cement socket S-shape trap; with-cleanout and long versions also in catalog (p18)
PVC-U Floor Cleanout (Socket x Socket)
Material: rigid PVC-U Sizes: 50 / 75 / 110 / 125 / 160 / 200 mm Joint: solvent-cement socket floor-level inspection cleanout
PVC-U Simple Floor Drain (Spigot)
Material: rigid PVC-U Sizes: 50 / 75 / 110 / 125 / 160 mm Joint: spigot grated floor drain; socket version 'Simple Floor Drain (Soc)' on p24 with same 5 sizes
PVC-U Long Thread Expansion Joint
Material: rigid PVC-U Sizes: 50 / 75 / 110 mm Joint: threaded expansion joint type II (dn110) on same page
PVC-U Pipe Clamp (Type III)
Material: rigid PVC-U Sizes: 50 / 75 / 110 / 125 / 160 mm Joint: clamp middle-section pipe customer-provided; not for lifting; plastic-base version also listed
PVC-U Pipe Clamp Type IV (without Screw)
Material: rigid PVC-U Sizes: 50 / 75 / 110 / 125 mm Joint: clamp screw / tusk-screw versions on p38
PVC-U Structured-wall Silencing Cleanout Tee (Gasket x Socket)
Material: rigid PVC-U Sizes: 75 / 110 mm Joint: rubber-ring x solvent-cement socket same-floor silent speedy-flow series; gasket-gasket-mpt version (dn75-200) on p35
PVC-U Drainage Thicken Solid 90° Elbow (Socket x Socket)
Material: rigid PVC-U Sizes: 110 / 160 mm Joint: solvent-cement socket Thicken Solid pipe series for high buildings
PVC-U Fabricated Wye (Socket x Socket x Socket)
Material: rigid PVC-U Sizes: 400 / 500 mm Joint: solvent-cement socket fabricated large-diameter fitting (welded)
PVC-U Square Wye (All Socket)
Material: rigid PVC-U Sizes: 75x50 / 110x73 / 160x107 mm Joint: solvent-cement socket square rainwater series; BxH mm
PVC-U Square Pipe Eccentric Rainwater Head (With Filter)
Material: rigid PVC-U Sizes: 75x50 / 110x73 / 160x107 mm Joint: solvent-cement socket eccentric rainwater head with filter
Hotel Guestroom Movable Furniture (Project Custom)
Range: bed frames / nightstands / writing desks / chairs / sofas / luggage racks / coffee tables Customization: dimensions, substrates (solid wood / plywood / veneered panels), upholstery and colors per project design Service: design development → sample room → batch production → on-site installation Applications: star-rated, themed, business and chain hotels
Hotel Guestroom Fixed Furniture (Project Custom)
Range: wardrobes / minibar cabinets / TV feature walls / headboard walls / wall paneling / doors & frames / vanity cabinets Process: factory prefabrication with edge banding, dry-method on-site assembly Customization: layout adaptation, finish materials and colors, hardware per project design Applications: guestrooms and suites of star-rated, boutique and chain hotels
Hotel Public Area Furniture (Project Custom)
Range: lobby reception desks/sofas, banquet tables & chairs, conference furniture, restaurant seating, corridor joinery Customization: shapes, dimensions, substrates, upholstery, colors per interior design Service: unified shop-drawing for joinery and movable furniture, phased delivery Applications: hotel public areas, conference centers, clubs
Resort Villa Furniture (Project Custom)
Range: living / bedroom / dining / study joinery and movable furniture Customization: styling, substrates, veneer / lacquer / melamine finishes, soft upholstery Service: sample prototyping → batch production → installation delivery Applications: resort villas, serviced apartments, cultural-tourism complexes
Horizontal concealed fan coil unit (FP-600 range, 3-row coil, 2-pipe)
Model: FP-600WA-3G Rated airflow (H/M/L): 1020/820/560 m³/h Rated cooling capacity (H, total/sensible): 6380/4466 W Rated heating capacity (H): 10020 W Input power (H, 12/30/50Pa): 93/100/114 W Noise (H, 12/30/50Pa): 44/46/47.5 dB(A) Power supply: 220V/1PH/50Hz Water flow rate: 1.10 m³/h, chilled water pressure drop: 30 kPa Overall dimensions (L×W×H): 1065×481×243 mm Unit net weight (without/with return air box): 19.5/23.5 kg Water inlet/outlet pipe: Rc3/4 tapered internal thread, max. working pressure 1.6 MPa
Brushless DC horizontal concealed fan coil unit (FP-1000 range, 3-row coil)
Model: FP-1000WA-3K (stepped-speed type, example FP-1000WAM-3GLK) Rated airflow (H/M/L): 1700/1360/940 m³/h Rated cooling capacity (H, total/sensible): 10120/7084 W Rated heating capacity (H): 15820 W Input power (H, 12/30/50Pa): 74/85/103 W Noise (H, 12/30/50Pa): 44.5/46.5/48.5 dB(A) Power supply: 220V/1PH/50Hz Water flow rate: 1.74 m³/h, chilled water pressure drop: 35 kPa Overall dimensions (L×W×H): 1525×467×243 mm Unit net weight (without/with return air box): 30.0/36.0 kg
Ultra-thin horizontal concealed fan coil unit (FP-500 range, 3-row coil)
Model: FP-500WB-3A Rated airflow (H/M/L): 850/680/470 m³/h Rated cooling capacity (H, total/sensible): 4850/3395 W Rated heating capacity (H): 8070 W Input power (H, 12Pa): 81 W Noise (H, 12Pa): 43.5 dB(A) Power supply: 220V/1PH/50Hz Water flow rate: 0.81 m³/h, water pressure drop: 20 kPa Overall dimensions (L×W×H): 1405×460×185 mm Unit net weight (without/with return air box): 25.5/30.5 kg
Cassette fan coil unit (FP-600 range, four-way air outlet, high-lift drainage type)
Model: FP-600KM-CQ1 Rated airflow (H/M/L): 1360/1030/590 m³/h Rated cooling capacity (H): 5.8 kW Rated heating capacity (H): 9.3 kW Input power (H): 83 W, running current: 0.40 A Noise (H): 43 dB(A) Power supply: 220V/1PH/50Hz Unit dimensions: 660×660×290 mm, panel dimensions: 750×750×45 mm Net weight: 19 kg Water pipe: ZG3/4" taper socket internal thread, drain pipe outer diameter Φ26
Horizontal cabinet fan coil unit (KWG-100 range, 4-row coil)
Model: KWG100-4 Rated airflow: 10000 m³/h Cooling capacity (return air condition/fresh air condition): 61.5/131.8 kW Heating capacity (return air condition/fresh air condition): 91.6/147.6 kW Water flow rate (return air/fresh air): 2.94/6.30 L/s Water pressure drop (return air/fresh air): 30.2/27.6 kPa External static pressure (return air/fresh air): 200/400 Pa Motor power (return air/fresh air): 2.2/3.0 kW Noise: ≤64 dB(A) Unit weight: 350 kg
Vertical cabinet fan coil unit (KLG-100 range, 4-row coil)
Model: KLG100-4 Rated airflow: 10000 m³/h Cooling capacity (return air condition/fresh air condition): 61.5/131.8 kW Heating capacity (return air condition/fresh air condition): 91.6/147.6 kW Water flow rate (return air/fresh air): 2.94/6.30 L/s Water pressure drop (return air/fresh air): 30.2/27.6 kPa External static pressure (return air/fresh air): 200/400 Pa Motor power (return air/fresh air): 2.2/3.0 kW Noise: ≤64 dB(A) Unit weight: 350 kg
Air-cooled unitary air conditioning unit (KAD-42 range, heat pump type)
Model: KAD-42D2RD(M) (heat pump type; cooling-only type is KAD-42D2CD(M)) Cooling capacity: 42 kW (36113 kcal/h) Heating capacity: 45 kW (38693 kcal/h) Rated cooling power (duct type/hood type): 15.8/15.1 kW SEER (duct type/hood type): 3.08/3.25 APF (duct type/hood type): 2.87/3.09 Control range 16~30°C, control accuracy ±2°C Airflow: 7200 m³/h Refrigerant: R410A, power supply: 380V/3N~/50Hz
Water-cooled unitary air conditioning unit (KLD-150 class)
Model: KLD-150D2CD (cooling-only, optional auxiliary electric heater KLD-150D2CDH3) Cooling capacity: 150 kW (128970 kcal/h) Cooling input power: 37.2 kW IPLV (ducted type/hood type): 4.1 Unit noise: 79 dB(A) Max. operating current: 96.2 A, max. operating power: 58.9 kW Temperature range: 18~32°C Compressor: high-efficiency hermetic scroll ×3 Refrigerant: R410A, power supply: 380V/3N~/50Hz
Modular air handling unit (ZK-1015 section, rated air volume 10000 m³/h)
Model: ZK1015A-HL (height module 10 × width module 15, panel A=30mm) Rated air volume: 10000 m³/h Casing panel thickness: 30/40/50mm (A/B/C) optional Functional sections: mixing section, secondary return air section, filtration section (primary/medium-efficiency/bag/activated carbon/electronic purification/photocatalyst/ozone sterilization), surface cooling coil section, hot water/steam coil section, electric heating section, sound attenuation section, rotary wheel heat recovery section, wet film/electrode/high-pressure spray humidification section, spray section, UV sterilization section, fan section, etc. Unit piping connection direction optional left/right (L/R)
Modular air handling unit (ZK-2533 section, rated air volume 70000 m³/h)
Model: ZK2533 (height module 25 × width module 33) Rated air volume: 70000 m³/h Casing panel thickness: 30/40/50mm optional Functional section combination same as full ZK series (mixing/filtration/cooling/heating/humidification/sound attenuation/heat recovery/fan sections, etc.)
Air-cooled DX modular air handling unit (constant temperature and humidity return air type, ZKD-ZK0811 class)
Model: ZKD-ZK0811 (with outdoor unit KAO-120) Nominal cooling capacity: 30.4 kW Nominal heating capacity: 33.6 kW Air volume: 6500 m³/h Constant temperature and humidity configuration: electric heating 24 kW, electrode humidification Outdoor unit: KAO series (R410A, cooling-only/heat pump optional) Unit type: return air type (H full return air), also available in full fresh air type (X)
Air-cooled DX modular air handling unit (full fresh air type, ZKD-ZK1014 class)
Model: ZKD-ZK1014 (with outdoor unit KAO-240) Nominal cooling capacity: 77.9 kW Air volume: 8000 m³/h Full fresh air type (X type) Outdoor unit: KAO series (R410A) Same series cooling capacity range 15.9~129.8 kW, air volume 1600~12000 m³/h
Modular water-cooled chiller (KWW-150 class)
Model: KWW-150M2CA (R410A, cooling-only type) Nominal cooling capacity: 155 kW Cooling input power: 30.3 kW COP: 5.12, IPLV: 6.33 Energy efficiency grade: Grade 2 Chilled water flow: 26.7 m³/h, chilled water pressure drop 43.8 kPa Cooling water flow: 33.3 m³/h, cooling water pressure drop 49 kPa Compressor: hermetic scroll ×2 Evaporator/Condenser: shell-and-tube Power supply: 380V/3N~/50Hz
Modular water-source heat pump unit (groundwater type, KWW-150 class)
Model: KWW-150M2RGWA (R410A, heat pump type, groundwater type) Rated cooling capacity: 161 kW Rated heating capacity: 176 kW Compressor: hermetic scroll Refrigerant: R410A Power supply: 380V/3N~/50Hz Cooling capacity stages in the same series: 70/105/150/220/300 (single module)
Modular air-cooled chiller (heat pump) unit (KAW-065 class, heat pump type)
Model: KAW-065A2R (R410A, heat pump type) Nominal cooling capacity: 65 kW Nominal heating capacity: 70 kW Refrigerant: R410A Power supply: 380V/3N~/50Hz Combination mode: 1–16 modules in parallel (single module 65–208 kW)
Modular air-cooled chiller (KAW-100 class, cooling-only type)
Model: KAW-100A2C (R410A, cooling-only type) Nominal cooling capacity: 100 kW Refrigerant: R410A Power supply: 380V/3N~/50Hz Combination mode: 1–16 modules in parallel
Modular Inverter Air-Cooled Chiller (Heat Pump) Unit (KAW-130 Class)
Model: KAW-130B2RB (R410A, heat pump type; cooling-only type KAW-130B2CB) Nominal cooling capacity: 130.0 kW Refrigerant: R410A Power supply: 380V/3N~/50Hz Series specifications: 65/130 (single module) Cooling capacity combination range: 65~208 kW
Four-Pipe Modular Air-Cooled Chiller (Heat Pump) Unit (KAW-65 Class)
Model: KAW-65A2S (R410A) Cooling-only mode: nominal cooling capacity 65 kW, input power 19.2 kW, water flow 11.2 m³/h, coefficient of performance 3.39 Heating-only mode: nominal heating capacity 70 kW, input power 20.5 kW, water flow 14.1 m³/h Simultaneous cooling and heating mode: nominal cooling capacity 65 kW Refrigerant: R410A, power supply: 380V/3N~/50Hz
Hot-rolled ribbed steel bars HRB400E Φ10–Φ40 (GB/T 1499.2-2024)
Grade: HRB400E (same catalog line includes HRB400/HRB500/HRB500E) Nominal diameter: 10–40 mm Standard: GB/T 1499.2-2024 Delivery form: Straight bars (fixed length) Remarks: Mass production
Hot-rolled ribbed steel bars HRB500E Φ10–Φ40 (GB/T 1499.2-2024)
Grade: HRB500E (same catalog line includes HRB400/HRB400E/HRB500) Nominal diameter: 10–40 mm Standard: GB/T 1499.2-2024 Delivery form: Straight bars (fixed length) Remarks: Mass production
Hot-rolled ribbed steel bars HRB600 Φ12–Φ40 (GB/T 1499.2-2024)
Grade: HRB600 Nominal diameter: 12–40 mm Standard: GB/T 1499.2-2024 Delivery form: Straight bars (fixed length) Remarks: Mass production for 32–40 mm
Hot-rolled ribbed steel bars for railway use HRB400T Φ12–Φ32 (GB/T 1499.2-2024, GB/T 37439-2019)
Grade: HRB400T Nominal diameter: 12–32 mm Standard: GB/T 1499.2-2024, GB/T 37439-2019 Delivery form: Straight bars (fixed length) Remarks: Mass production
British/Dubai standard hot-rolled ribbed steel bars B500B Φ10–Φ40 (BS 4449:2005)
Grade: B500B Nominal diameter: 10–40 mm Standard: BS 4449:2005 Delivery form: Straight bars (fixed length) Remarks: In the British standard market, mass production for 10–32 mm; in the Dubai market, sample production for 10/25/40 mm
Singapore standard hot-rolled ribbed steel bars B500B Φ10–Φ40 (SS 560:2016)
Grade: B500B Nominal diameter: 10–40 mm Standard: SS 560:2016 Delivery form: Straight bars (fixed length) Remarks: Mass production for 10–32 mm
Hong Kong standard hot-rolled ribbed steel bars B500B/500B Φ10–Φ40 (CS 2:2012)
Grade: B500B/500B Nominal diameter: 10–40 mm Standard: CS 2:2012 Delivery form: Straight bars (fixed length) Remarks: Mass production for 12–32 mm (civil adaptation plan required)
Korean standard hot-rolled ribbed steel bars SD400(S)/SD500(S)/SD600(S) Φ10–Φ32 (KS D 3504:2021)
Grade: SD400(S)/SD500(S)/SD600(S) Nominal diameter: 10–32mm Standard: KS D 3504:2021 Delivery form: Straight lengths (fixed length) Remarks: Sample production for 10/25/32mm
Russian standard hot-rolled ribbed steel bars GOST 5781-82 grade A-I(A240) to A-IV(A600) Φ10–Φ40
Grade: A-I(A240), A-II(A300), Ac-II(Ac300), A-I(A400), A-IV(A600) (as in original catalog) Nominal diameter: 10–40mm Standard: GOST 5781-82 Delivery form: Straight lengths (fixed length)
American standard hot-rolled ribbed steel bars Gr60 Φ10–Φ40 (ASTM A615/A615M)
Grade: Gr60 (same catalog line includes Gr40/Gr80) Nominal diameter: 10–40mm Standard: ASTM A615/A615M, ASTM A706/A706M Delivery form: Straight lengths (fixed length)
Colombian standard hot-rolled ribbed steel bars Gr60/Gr80 Φ10–Φ40 (NTC 2289:2020)
Grade: Gr60/Gr80 Nominal diameter: 10–40mm Standard: NTC 2289:2020 Delivery form: Straight lengths (fixed length) Remarks: Sample production for 10/25mm
European standard hot-rolled ribbed steel bars B500B Φ10–Φ40 (EN 10080:2005)
Grade: B500B Nominal diameter: 10–40mm Standard: EN 10080:2005 Delivery form: Straight lengths (fixed length) Remarks: Sample production for 10/25/40mm
Hot-rolled wire rod SAE1006/SAE1008 Φ5.5–Φ16 (SAE J403:2001)
Grade: SAE1006/SAE1008 Nominal diameter: 5.5–16mm Standard: SAE J403:2001 Delivery form: Coils Remarks: Certification and testing not required (as in original catalog)
Hot-rolled ribbed steel bars for anchor bolts (threaded ribs) MG335Z/Y, MG400Z/Y, MG500Z/Y Φ18–Φ22
Grade: MG335Z/Y, MG400Z/Y, MG500Z/Y (for crescent-ribbed type, MG335/MG400/MG500 are also available) Nominal diameter: 18–22 mm Applicable standards: YB/T 4364-2014, MT 146-2011 and technical agreement Delivery form: straight bars Remarks: Mass production
OLT 16-Port GPON, Dual 10-Gigabit Uplink (Rack-Mounted)
PON ports: 16×GPON SFP (1000BASE-PX20+/PX20++/PX20+++, max split ratio 1:128) Uplink ports: 4×GE COMBO + 2×10GE SFP+ Management ports: CONSOLE + out-of-band/in-band management network port Packet forwarding rate: 95.23 Mpps Redundancy design: dual power supply, supports dual AC, dual DC, AC+DC input Dimensions: 440×44×380 mm (1U rack-mounted) Weight: ≤5 kg; Max power: ≤150 W; Power supply: AC 100–240 V 50/60 Hz Operating environment: -10°C to 55°C, relative humidity 10%–90% non-condensing
OLT 8-Port GPON, Dual 10-Gigabit Uplink
PON ports: 8×GPON SFP (max split ratio 1:128) Uplink ports: 4×GE COMBO + 2×10GE SFP+ + 2×Gigabit SFP+ Management ports: CONSOLE + out-of-band/in-band management network port Redundancy design: dual power supply, supports dual AC, dual DC, AC+DC input Dimensions: 430×405×90 mm (2U) Weight: ≤5 kg; Max power: ≤110 W; Power supply: AC 100–240 V 50/60 Hz Operating environment: -10°C to 55°C, relative humidity 10%–90% non-condensing
OLT 4-Port EPON, 10-Gigabit Uplink
PON ports: 4×EPON (1:64 split ratio, 1.25 Gbps/1.25 Gbps per port) Uplink ports: 4×100/10000M SFP/SFP+ optical ports + 4×10/100/1000M copper ports Rated power: 50 W Dimensions: 307×430×46 mm; Weight: 4.5 kg Material: iron housing; Indicators: PWR + port indicators Operating environment: -10°C to 65°C, humidity 10%–90% RH non-condensing
OLT 4-Port EPON, Gigabit Uplink
PON ports: 4×EPON (1:64 split ratio) Uplink ports: 4×100/1000M SFP/SFP+ optical ports + 4×10/100/1000M copper ports Rated power: 50 W Dimensions: 513×389×40 mm; Weight: 4.5 kg Material: iron housing; Indicators: PWR + port indicators Operating environment: -10°C to 65°C, humidity 10%–90% RH non-condensing
OLT 8-Port EPON
PON ports: 8×EPON (1:64 split ratio, 1.25 Gbps/1.25 Gbps per port) Uplink ports: 4×100/10000M SFP/SFP+ optical ports + 4×10/100/1000M copper ports Rated power: 50 W Dimensions: 430×405×90 mm; Weight: 4.5 kg Material: iron housing; Indicators: PWR + port indicators Operating environment: -10°C to 65°C, humidity 10%–90% RH non-condensing
Chassis-Type OLT, Medium (2 Main Control + 4 Service Slots)
Number of slots: 2 main control slots + 4 service slots Max PON interfaces: 64×GPON / 32×10GEPON System capacity: backplane bandwidth 4T, MAC address capacity 128K Transmission rate: downstream 1.25 Gbps / upstream 1.25 Gbps, supports PX20+/PX20++ PON modules Split ratio: up to 1:128 Power supply: AC 90–264 V / DC 36–72 V, dual power inputs, AC/DC mixed insertion, hot-swappable power modules Dimensions: 399.7×482.6×548 mm, standard 19-inch rack mounting Operating environment: 0°C to 45°C, humidity 10%–85% non-condensing
Chassis-Type OLT, Large (2 Main Control + 8 Service Slots)
Number of slots: 2 main control slots + 8 service slots Max PON interfaces: 128×GPON / 64×10GEPON System capacity: backplane bandwidth 4T, MAC address capacity 128K Transmission rate: downstream 1.25 Gbps / upstream 1.25 Gbps, supports PX20+/PX20++ PON modules Split ratio: up to 1:128 Power supply: AC 90–264 V / DC 36–72 V, dual power inputs, AC/DC mixed insertion, hot-swappable power modules Dimensions: 533.1×482.6×548 mm, standard 19-inch rack mounting Operating environment: 0°C to 45°C, humidity 10%–85% non-condensing
Carrier-Class Core Switch 3-Slot
Slot quantity: 3 slots (3 service slots) Switching capacity: 38.4/166.4 Tbps MAC address: supports static configuration and dynamic learning Features: IPv6, MPLS VPN, traffic analysis, virtualization, non-stop forwarding, graceful restart Application layer: core or aggregation layer
Carrier-Class Core Switch 6-Slot
Slot quantity: 6 slots (4 service slots) Switching capacity: 76.8/307.2 Tbps MAC address: supports static configuration and dynamic learning Features: IPv6, MPLS VPN, traffic analysis, virtualization, non-stop forwarding, graceful restart Application layer: core or aggregation layer
Carrier-Class Core Switch 10-Slot
Slot quantity: 10 slots (8 service slots) Switching capacity: 105.6/422.4 Tbps MAC address: supports static configuration and dynamic learning Features: IPv6, MPLS VPN, traffic analysis, virtualization, non-stop forwarding, graceful restart Application layer: core layer
Gigabit Cloud Core Layer 3 Switch 24-Port
Downlink ports: 24×10/100/1000Base-T RJ45 Uplink ports: 4×100/1000 SFP + 1 management port Switching capacity: 128 Gbps; Packet forwarding rate: 95 Mpps MAC address table: 16K; Buffer: 12 Mbit Power supply: 100–240 V AC, redundant power supply built-in 2 groups, power consumption <30 W Lightning protection: 6 KV (IEC61000-4-5); ESD protection: contact 8 KV/air 4 KV Dimensions: 440×320×44.5 mm
10-Gigabit Cloud Core Layer 3 Switch 24-Port + 4×10-Gigabit Optical
Interfaces: 24×10/100/1000 Mbps RJ45 + 4×10-Gigabit SFP+ + 1×RJ45 Console + 1×USB Switching capacity: 128 Gbps; Packet forwarding rate: 95.23 Mpps Features: STP/RSTP/MSTP, IGMP/MLD Snooping, 8 port queues, QoS, IPv6 Management: Web network management, CLI (Telnet/SSH), SNMP V1/V2/V3, LLDP
Gigabit Cloud Switch 28-Port
Ports: 24 Gigabit copper ports + 4 Gigabit SFP ports + 1 management port Backplane bandwidth: 56 Gbps; Packet forwarding rate: 41.66 Mpps; Packet buffer: 4 Mb Memory: 128 MB; Flash: 16 MB VLAN: 4096; MAC address table: 8K Forwarding mode: Store-and-forward (9.6 Kbytes jumbo frame) Mean time between failures: 100,000 hours
PoE Cloud Switch 10-Port Gigabit Managed
Ports: 8× Gigabit PoE RJ45 ports + 2× Gigabit SFP uplink ports + management port PoE Standard: IEEE802.3af/at, max 15.4W per port (af)/30W (at) Switching Capacity: 20Gbps; Packet Forwarding Rate: 14.88Mpps; Packet Buffer: 4M Memory: 128MB DDR; Flash: 16MB Power Supply: AC 100-240V/50-60Hz, 52V/2.3A Dimensions: 268×181×44mm; Net Weight: 1.2KG EMI/EMS: FCC Part 15, CISPR(EN55032) Class A, EN61000-4-2/4-4/4-5 Operating Environment: -20°C to 50°C, humidity 10% to 90% non-condensing
PoE Switch 10-Port Gigabit (8×GE PoE+2×SFP)
Ports: 8× Gigabit PoE RJ45 ports + 2× Gigabit SFP ports + 1 management port PoE Standard: IEEE802.3af/at, max 15.4W per port (af)/30W (at), PoE output DC52V, power pins 1/2+, 3/6- Network Protocols: IEEE802.3/802.3u/802.3ab/802.3x/802.3z Transmission Distance: 10BASE-T/100BASE-TX/1000BASE-TX all ≤100 m (Cat5 or above)
PoE Switch 8-Port Fast Ethernet Unmanaged
Ports: 8× 100M PoE RJ45 ports + 2× Gigabit uplink RJ45 ports + 1× Gigabit SFP optical port PoE Standard: IEEE802.3af/at, max 30W per port, total 120W Backplane Bandwidth: 7.6Gbps Operating Modes: VLAN / OFF / EXTEND three-position DIP switch PoE Output Voltage: DC52V, power pins 1/2+, 3/6-
PoE Switch 24-Port Gigabit
Ports: 24×10/100/1000Mbps RJ45 (PoE) + 2× Gigabit SFP Power: max 30W per port, total power 400W Backplane Bandwidth: 52Gbps Dimensions: 445×285×45mm; Material: Iron housing
Gigabit Managed Switch 8-Port
Ports: 8×10/100/1000Mbps auto-negotiation RJ45 ports Backplane Bandwidth: 20Gbps; Packet Buffer: 4Mbit Features: VLAN, QOS, STP, WEB management, MAC address auto-learning Features: Store-and-forward mode, flow control, MDI/MDIX auto-crossover
ONU Optical Modem 1 Gigabit + 3 Fast Ethernet Ports, Voice Type
Network Interfaces: 1×10/100/1000Mbps RJ45 + 3×10/100Mbps RJ45 Voice Port: 1×POTS; USB: 1×USB2.0 PON Mode: EPON/GPON adaptive, single-fiber bidirectional (downstream 1490nm/upstream 1310nm) Transmission Distance: up to 20km
ONU Optical Modem, 4 Gigabit Ports, Dual-Band WiFi, Voice Type
Network Interfaces: 4×10/100/1000M RJ45 Voice Ports: 2×VoIP; WiFi: 2.4G/5.8G dual-band; USB: Supported PON Mode: EPON/GPON adaptive, single-fiber bidirectional Transmission Distance: up to 20km
POE ONU 4 Gigabit POE Ports Voice Model (Hotel Model)
PON Port: 1×EPON (single-fiber bidirectional, downstream 1490nm/upstream 1310nm, max. 20km) Network Interfaces: 4×10/100/1000M Ethernet ports (with POE power supply) Voice Port: 1×POTS; USB: 1×USB port Management: Local WEB management, power failure reporting Structure: Full metal enclosure, wide temperature range
POE ONU 8-Port 100M (Security Surveillance Model)
PON Port: 1×EPON (single-fiber bidirectional, max. 20km) Network Interfaces: 8×10/100M adaptive POE Ethernet ports POE Standard: IEEE802.3af/at automatic detection and identification Management: Supports power failure reporting, local WEB management
Panel-Type ONU, Single Gigabit Port
PON: GPON (ITU-T G.984/G.988) Network Interface: 1×10/100/1000M adaptive RJ45 (Auto MDI/MDI-X, 100m transmission) Dimensions: 85×85×44mm (86 panel specification) Power Supply: AC220V Compliant Standards: IEEE 802.3ah, ITU-T G984/G.988, IEEE 802.1Q VLAN, IEEE 802.1D STP Management: Web/TELNET/TR069/OAM/OMCI
Panel-Type ONU, Single Gigabit Port + Voice Port
PON: GPON (ITU-T G.984/G.988) Network Interface: 1×10/100/1000M adaptive RJ45 Voice Port: 1×RJ11 (max. 1km, 55VRMS ringing) Dimensions: 85×85×44mm (86 panel specification); Power Supply: AC220V Management: Web/TELNET/TR069/OAM/OMCI Environment: Operating 0°C to 60°C
Panel-Type ONU, Dual Gigabit Ports
PON: GPON (upstream 1.25Gbps/downstream 2.5Gbps, SC-UPC/SC-APC) Network Interfaces: 2×10/100/1000M adaptive RJ45 Dimensions: 85×85×44mm (86 panel specification); Power Supply: AC220V Management: Web/TELNET/TR069/OAM/OMCI Compliant Standards: IEEE 802.3ah, ITU-T G984/G.988, IEEE 802.1Q, IEEE 802.1D
SFP-Type ONU Optical Module
Interface: SFP (hot-swappable), supply voltage 3.3V Mode: GPON (asymmetric upstream/downstream)/EPON (symmetric upstream/downstream) auto-adaptive Data Rate: 750Mbps Dimensions: 14×79×8mm; Weight: 0.2KG; Material: Iron; Color: Silver
In-Wall Panel AP, Single-Band 300M
Wireless Rate: 300Mbps (802.11n, 2.4G) Interface: 1×WAN port Memory/Flash: 64M/8M (Qualcomm solution) Rated Power: 3.5W Dimensions: 86×86×22mm; Weight: 0.2KG; Material: ABS; Color: White
Ceiling AP Single-Band 300M
Wireless Rate: 300Mbps (802.11n MIMO, 2.4G) CPU: Qualcomm industrial-grade 650MHz; Memory/Flash: 64M/16M Rated Power: 8W Dimensions: 184×184×35mm; Weight: 0.2KG; Material: ABS; Color: White Installation Method: Ceiling/Wall Mount Dual Use
In-Wall Panel AP Dual-Band 750M
Wireless Rate: 750Mbps (802.11ac, 2.4G+5.8G dual-band) Operating Frequency: 2.412-2.472GHz / 5.180-5.825GHz Interface: 1×WAN port Memory/Flash: 128M/16M (Qualcomm solution) Rated Power: 3.5W Dimensions: 86×86×22mm; Weight: 0.2KG; Color: White
Ceiling AP Dual-Band 750M
Wireless Rate: 750Mbps (802.11ac, 2.4G+5.8G dual-band) Operating Frequency: 2.412-2.472GHz / 5.180-5.825GHz CPU: Qualcomm industrial-grade 650MHz; Memory/Flash: 128M/16M Rated Power: 10W Dimensions: 184×184×35mm; Weight: 0.2KG; Material: ABS; Color: White
In-Wall Panel AP Gigabit Dual-Band 1200M
Wireless Rate: 1200Mbps (802.11ac dual-band) Operating Frequency: 2.412-2.472GHz / 5.180-5.825GHz Interfaces: 1×WAN + 1×LAN (10/100/1000Mbps) Memory/Flash: 128M/16M (Qualcomm solution) Rated Power: ≤5W Dimensions: 86×86×22mm; Weight: 0.2KG; Material: ABS; Color: White
In-Wall Panel AP Gigabit Dual-Band 1200M Multi-Port
Wireless Rate: 1200Mbps (802.11ac dual-band 2.4G+5.8G) Network Interfaces: 4×1000M ports (support VLAN partitioning) + 1×1000M pass-through port (IPTV/PSTN output) Chipset: MT7621DAN+7613B+7603E Flash: 16MB; Antenna: 2.4G 3dBi / 5.8G 3dBi
Ceiling AP Gigabit Dual-Band 1200M
Wireless Rate: 1200Mbps (802.11ac dual-band) Operating Frequency: 2.412-2.472GHz / 5.180-5.825GHz CPU: Qualcomm industrial-grade 650MHz; Memory/Flash: 128M/16M Rated Power: 15W Dimensions: 184×184×35mm; Weight: 0.2KG; Material: ABS; Color: White
Outdoor Omnidirectional AP Dual-Band 1200M (IP67)
Wireless speed: 2.4G 0.4Gbps + 5G 0.867Gbps (maximum total 1.267Gbps, 802.11ac Wave2) Wired interfaces: 2×10/100/1000Mbps LAN Protection rating: IP67 (waterproof and dustproof, adapts to severe cold and humid environments) Antenna: External omnidirectional antenna Management: Works with wireless controller (AC) for unified forwarding and access control
WiFi6 In-Wall Panel AP Dual-Band 1800M
Wireless speed: 2.4G 0.575Gbps + 5G 1.2Gbps (maximum total 1.775Gbps, 802.11ax) Structure: 86mm panel specification, compact and elegant, plug-and-play Power supply: Standard PoE Features: IPTV pass-through, seamless roaming, IoT module expansion Security: Wireless network security, RF control, mobile access, QoS guarantee
WiFi6 Ceiling-Mounted AP Dual-Band 1800M
Wireless speed: 2.4G 0.575Gbps + 5G 1.2Gbps (maximum total 1.775Gbps, 802.11ax) Power supply: Standard PoE Features: IPTV pass-through, seamless roaming, IoT module expansion Installation: Ceiling-mounted, plug-and-play
Outdoor High-Power Omnidirectional AP Dual-Band 1300M
Main chip: Qualcomm QCA9563+QCA9886+QCA8337 Memory: 256MB; Flash: 16MB PA chips: 2.4G SKY85330-11 ×3 + 5.8G SKY85735-11 ×2 Antenna: 4×8dBi detachable antennas as standard (optional) Maximum transmit power: 500mW (27dBm) Wireless speed: 1300Mbps Protection: Waterproof, lightning-proof, moisture-proof, freeze-proof
Outdoor Directional AP Dual-Band High-Power
Main chip: Qualcomm QCA9563+QCA8337+QCA9886 industrial-grade solution Memory: 128MB; Flash: 16MB Antenna: 2.4G 11dBi directional + 5.8G 13dBi directional Coverage angle: 60° horizontal, 30° vertical Maximum transmit power: 500mW; supports up to 160+ users PA chips: 2.4G SE2576L + 5.8G SKY85728-11
Multi-Service Cloud AP 4-Port Gigabit Voice Model
Network interfaces: 5×10/100/1000M RJ45 Voice ports: 2×POTS WiFi: 2.4G/5G dual-band; USB: supported Uplink: network cable access (RJ45 WAN)
WiFi + 4K TV Converged Terminal (PON/Network Port Uplink)
Chip: RTK9607C + HiSilicon 3798MV300E (4K decoding) Wireless: 2.4G 300Mbps + 5.8G 867Mbps (802.11a/b/g/n/ac), transmit power 20dBm (500mW) Uplink: GPON PON port or network port (two versions) Downlink interfaces: 2×Gigabit LAN + 1×POTS Video: HDMI2.0a, 4K HD display Management: TR069, cloud management; Flash: 8G (GPON version)
Full-Gigabit Secure Traffic Control Router
CPU: MTK7621; Memory: 512M Dimensions: 290×80×45mm Traffic Control: Layer 7 DPI recognition (1000+ applications), application traffic distribution, bandwidth aggregation, multi-WAN intelligent routing Security: ARP binding/security/trust, MAC filtering, port mapping, connection limit, DDoS defense IPTV: Supports small-scale scenarios within 20 endpoints (multicast-to-unicast)
Enterprise-Grade Secure Traffic Control Router (x86)
CPU: Intel 3855u; Hard Disk: 32G SSD×1 Dimensions: 307×430×46mm (1U rack-mount) Traffic Control: Layer 7 DPI recognition (1000+ applications), application traffic distribution, bandwidth aggregation, multi-WAN intelligent routing Security: ARP binding/security/trust, MAC filtering, port mapping, connection limit, DDoS defense IPTV: Supports small-scale scenarios within 20 endpoints (multicast-to-unicast)
6-Port Multi-Service Integrated Gateway
Network Interfaces: 6×10/100/1000M copper ports + 2×USB + 1×CONSOLE Memory: 32G DDR; Flash: 4G Max Power: 50W; Power Supply: AC220V; Weight: 3.8KG Dimensions: 307×430×46mm (1U rack-mount) Management Port: CONSOLE out-of-band/in-band management, supports remote and local management Operating Environment: -10°C to 65°C
10-Port Multi-Service Integrated Gateway
Network Interfaces: 10×10/100/1000M copper ports + 2×USB + 1×CONSOLE CPU: 3855; Memory: 64G DDR; Flash: 8G Max Power: 100W; Power Supply: AC220V; Weight: 4.5KG Dimensions: 307×430×68mm (1U rack-mount) Operating Environment: -10°C to 65°C
Multi-Service Integrated Gateway 10-Gigabit Uplink
Network Interfaces: 6×10/100/1000M copper ports + 2×10GE optical ports + 2×USB + 1×CONSOLE CPU: Intel E3; Memory: 64G DDR; Flash: 8G Max Power: 100W; Power Supply: AC220V; Weight: 18.5KG Dimensions: 507×405×90mm (2U) Operating Environment: -10°C to 65°C
Multi-Service Integrated Gateway Dual-Socket Flagship Model
CPU: Intel E5 2420×2 (Dual-Socket) Network Interfaces: 6×10/100/1000M copper ports + 2×10GE optical ports + 2×USB + 1×CONSOLE Memory: 64G DDR; Flash: 16G Max Power: 100W; Power Supply: AC220V; Weight: 18.5KG Dimensions: 670×480×90mm (2U)
IPTV System Headend Gateway Standard Model
CPU: Intel 3855u Network Interfaces: 6×10/100/1000M copper ports + 2×USB + 1×CONSOLE Memory: 32G DDR; Flash: 8G; Max Power: 100W; Weight: 4.5KG Dimensions: 307×430×69mm (1U rack-mount) Functions: Live TV/VOD/Catch-up TV/Screen Casting/Multimedia Advertising, Network Topology Map O&M
IP TV System Front-End Gateway Enhanced (10-Gigabit Uplink)
Network Interfaces: 6×10/100/1000M copper ports + 2×10GE optical ports + 2×USB + 1×CONSOLE Memory: 64G DDR Maximum Power: 100W; Weight: 18.5KG Dimensions: 670×480×90mm (2U rack-mount) Functions: Live TV/VOD/Catch-up/Screen Casting/Multimedia Advertising, network topology diagram O&M
Audio and Video Convergence Dispatch Gateway
Network Interfaces: 6×10/100/1000M copper ports + 2×USB + 1×CONSOLE Memory: 32G DDR; Flash: 4G Maximum Power: 50W; Weight: 3.8KG; Power Supply: AC220V Dimensions: 307×430×46mm (1U rack-mount) Protocol: SIP; Services: IP broadcast intercom, video backhaul, dispatch console access
Multimedia Dispatch Console
Structure: Aluminum alloy, supports panel-type/desktop installation with 65-degree horizontal adjustable flip viewing angle Composition: Dual IP phone handsets + touchscreen display Environmental Adaptability: Rugged, shockproof, moisture-proof, dustproof, high-temperature resistant
4-Channel HDMI HD Encoder
Video Input: 4×HDMI Encoding: H.264 dual stream (Baseline/Main/High Profile), audio MP3/AAC Resolution: 1920×1080p/1080i/1280×720p/720×576i/720×576p/640×480i (customizable) Transmission Protocols: HTTP/RTSP/RTMP/UDP/HLS/ONVIF Network Ports: Dual network ports (data + debugging) Operating Temperature: -20℃ to +60℃; Humidity: <90% non-condensing
8-Channel HDMI HD Encoder
Video Input: 8×HDMI (managed in two groups) Encoding: H.264 dual stream, audio MP3/AAC Resolution: 1920×1080p/1080i/1280×720p/720×576i/720×576p/640×480i (customizable) Transmission Protocols: HTTP/RTSP/RTMP/UDP/HLS/ONVIF Network Ports: Dual network ports (data + debugging) Operating Temperature: -20℃ to +60℃; Humidity: <90% non-condensing
4K Hotel Set-Top Box
Video: 4K UHD decoding, professional-grade decoding chip Wireless: Integrated wireless AP function, dynamically and randomly generates WiFi password Personalization: Supports customized boot screen Applications: Live TV, VOD, online database terminal
Video IP Phone
System: Android 4.2.2 Services: HD audio/video, virtual programmable keys Networking: connect to audio/video gateway/dispatch console/POE switch Applications: desktop communications, value-added service expansion
SIP alarm call intercom terminal
Protocol: SIP Protection rating: IP54 (dustproof, splashproof) Installation: wall-mounted Functions: intelligent security, audio/video intercom, broadcasting, call alarm Networking: connect to audio/video gateway/POE switch
SIP video intercom access control
Protocol: SIP, video IP/RTP/RTSP Protection rating: IP65 (dustproof, splashproof) Unlock methods: remote unlock, password unlock, card swipe unlock, indoor switch unlock Functions: video intercom, access control Networking: connect to audio/video gateway/POE switch for unified management
Self-Drilling Hollow Anchor Bar T103/51, T-Thread (OD 103 mm x ID 51 mm)
Thread type: T (factory standard; flank angle >= 45 deg) Outer diameter: 103 mm Inner diameter: 51 mm Cross-sectional area: 5682 mm2 Ultimate load: 3660 kN Load at 0.2% yield: 2760 kN Unit weight: 44.6 kg/m Steel grades: 40Cr / Q355B / S460NH (DIN EN ISO 683 / DIN EN 10083 / DIN EN 10210) Elongation per market standard: A200mm >= 6% / Agt >= 5% / A100mm >= 4% / A >= 14% Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar T103/43, T-Thread (OD 103 mm x ID 43 mm)
Thread type: T (factory standard; flank angle >= 45 deg) Outer diameter: 103 mm Inner diameter: 43 mm Cross-sectional area: 5987 mm2 Ultimate load: 4155 kN Load at 0.2% yield: 3400 kN Unit weight: 47.0 kg/m Steel grades: 40Cr / Q355B / S460NH (DIN EN ISO 683 / DIN EN 10083 / DIN EN 10210) Elongation per market standard: A200mm >= 6% / Agt >= 5% / A100mm >= 4% / A >= 14% Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Self-Drilling Hollow Anchor Bar T114/3450, Ultra-Tensile (OD 114 mm x ID 88 mm)
Thread type: T Outer diameter: 114 mm Inner diameter: 88 mm Cross-sectional area: 3684 mm2 Ultimate load: 3450 kN Load at 0.2% yield: 2700 kN Tensile strength: > 1100 N/mm2 Yield strength: > 900 N/mm2 Unit weight: 29 kg/m Corrosion protection: hot-dip galvanizing / epoxy coating / duplex coating / stainless steel
Grade 75 Self-Drilling Hollow Anchor Bar T30/196, Imperial Series (OD 30 mm x ID 16 mm)
Thread type: T, left hand Outer diameter: 1.18 in (30 mm) Inner diameter: 0.63 in (16 mm) Cross-sectional area: 0.51 in2 (331 mm2) Ultimate load: 44 kips (196 kN) Load at yield: 33 kips (147 kN) Elongation: >= 6% in 8-in. bar Unit weight: 1.75 lbs/ft (2.6 kg/m) All-thread bar size: 0.75 in (19 mm)
Grade 75 Self-Drilling Hollow Anchor Bar TR38/565, Imperial Series (OD 38 mm x ID 20 mm)
Thread type: TR, left hand Outer diameter: 1.50 in (38 mm) Inner diameter: 0.79 in (20 mm) Cross-sectional area: 1.09 in2 (700 mm2) Ultimate load: 127 kips (565 kN) Load at yield: 95.3 kips (424 kN) Elongation: >= 6% in 8-in. bar Unit weight: 3.70 lbs/ft (5.5 kg/m) All-thread bar size: 1.26 in (32 mm)
Grade 75 Self-Drilling Hollow Anchor Bar T52/1001, Imperial Series (OD 52 mm x ID 26 mm)
Thread type: T, left hand Outer diameter: 2.04 in (52 mm) Inner diameter: 1.02 in (26 mm) Cross-sectional area: 1.95 in2 (1261 mm2) Ultimate load: 225 kips (1001 kN) Load at yield: 169 kips (750 kN) Elongation: >= 6% in 8-in. bar Unit weight: 6.65 lbs/ft (9.9 kg/m) All-thread bar size: 1.69 in (43 mm)
Pushkin Luxury Stone Slab 3200×1600×6mm
Specifications: 3200×1600 mm Thickness: 6mm Design faces: 6 (one set of omnidirectional continuous veining) Material: Porcelain stone slab (water absorption ≤0.5%, Catalog Appendix 2) Breaking strength ≥1300N, modulus of rupture ≥35MPa Executive standard: GB/T 4100-2015 (test method UNI EN ISO 10545)
Maya Luxury Stone Slab 1200×2800×6mm (Matte)
Specifications: 1200×2800 mm Thickness: 6mm Process: Dry Grain Matte Design faces: 4 Material: Porcelain stone slab (water absorption ≤0.5%) Executive standard: GB/T 4100-2015
Lycra Imprint Oak · Gold Artistic Metal Tile 2700×1200×9mm
Specifications: 2700×1200 mm (also includes 2700×800, 1800×900, all 9mm) Thickness: 9mm Process: Artistic Metal Design faces: 4 (variation level V2) Material: Porcelain (water absorption ≤0.5%) Executive standard: GB/T 4100-2015
Treviso Wood Grain Tile 2700×1200×10mm
Specifications: 2700×1200 mm (model range K2712) Thickness: 10mm Process: Tempered Glaze Design faces: 3 (variation level V2) Material: Porcelain (water absorption ≤0.5%) Executive standard: GB/T 4100-2015
Four Seasons Pink Luxury Stone Tile 2700×1200×9mm
Specifications: 2700×1200 mm (model range K2712) Thickness: 9mm Process: True Stone Glaze 1.0 Design faces: 3 (3 pieces per set with omnidirectional continuous veining, variation level V3) Material: Porcelain (water absorption ≤0.5%) Executive standard: GB/T 4100-2015
Mystic Charm Stone Marble Tile 2700×1200×9mm
Specifications: 2700×1200 mm (same series includes 1200×1200) Thickness: 9mm Process: True Stone Glaze 1.0 Design faces: 3 (variation level V2) Material: Porcelain (water absorption ≤0.5%) Executive standard: GB/T 4100-2015
Peach and Plum Spring Breeze Luxury Stone Tile 2700×1200×9mm
Specifications: 2700×1200 mm (model range K2712) Thickness: 9mm Process: True Stone Glaze 1.0 Design faces: 4 (variation level V3) Material: Porcelain (water absorption ≤0.5%) Executive standard: GB/T 4100-2015
Kunlun Cave Heaven Travertine Tile 2700×1200×9mm
Size: 2700×1200 mm (also includes 1800×900 and 1500×750, all 9mm) Thickness: 9mm Finish: True-Stone Glaze 1.0 Design faces: 3 faces (variation level V2) Material: Porcelain (water absorption ≤0.5%) Standard: GB/T 4100-2015
Italian Ivory Cave True-Hole Travertine Tile 2700×1200×9mm
Size: 2700×1200 mm (also includes 1200×600, all 9mm) Thickness: 9mm Finish: Dry-Grain Satin (True-Hole process) Design faces: 3 faces (variation level V2) Material: Porcelain (water absorption ≤0.5%) Standard: GB/T 4100-2015
Italian Silver Grey Cave True-Hole Travertine Tile 2700×1200×9mm
Size: 2700×1200 mm (also includes 1200×600, all 9mm) Thickness: 9mm Finish: Dry-Grain Satin (True-Hole process) Design faces: 3 faces (variation level V2) Material: Porcelain (water absorption ≤0.5%) Standard: GB/T 4100-2015
French Limestone True-Hole Limestone Tile 2700×1200×9mm
Size: 2700×1200 mm (also includes 1200×600, all 9mm) Thickness: 9mm Finish: Dry-Grain Satin (True-Hole process) Design faces: 3 faces (variation level V2) Material: Porcelain (water absorption ≤0.5%) Standard: GB/T 4100-2015
Hawaii Sandstone Tile 2700×800×10mm
Size: 2700×800 mm (model range K0278) Thickness: 10mm Finish: Dry-Grain Satin Design faces: 3 faces (left-right continuous grain, variation level V2) Material: Porcelain (water absorption ≤0.5%) Standard: GB/T 4100-2015
Laika Oak Print Wood-Grain Strip Tile 1800×225×9mm
Size: 1800×225 mm (same series includes 2700×800 and 1500×750, all 9mm) Thickness: 9mm Finish: Satin Design faces: 4 faces (variation level V2) Material: Porcelain (water absorption ≤0.5%) Standard: GB/T 4100-2015
Buster Fabric-Grain Tile 2700×800×9mm
Specification: 2700×800 mm (model series K0278) Thickness: 9mm Finish: Satin Design Faces: 2 faces (Variation Level V2) Material: Porcelain (water absorption ≤0.5%) Standard: GB/T 4100-2015
Shan Hai Jing Luxury Stone Tile 2400×1200×9mm
Specification: 2400×1200 mm (also includes 1800×900, both 9mm) Thickness: 9mm Finish: True Stone Glaze 1.0 Design Faces: 3 faces (one set omnidirectional continuous veining, Variation Level V3) Material: Porcelain (water absorption ≤0.5%) Standard: GB/T 4100-2015
Danube Luxury Stone Tile 1800×1200×9mm
Specification: 1800×1200 mm (model series K1812) Thickness: 9mm Finish: Tempered Glaze Design Faces: 3 faces (one set omnidirectional continuous veining, Variation Level V3) Material: Porcelain (water absorption ≤0.5%) Standard: GB/T 4100-2015
Tarantella Luxury Stone Tile 1800×1200×9mm
Specification: 1800×1200 mm (same series includes 2700×800×10mm) Thickness: 9mm Finish: Tempered Glaze Design Faces: 3 faces (Variation Level V3) Material: Porcelain (water absorption ≤0.5%) Standard: GB/T 4100-2015
Mirror Lake Spring Dawn Luxury Stone Tile 1200×1800×9mm
Specification: 1200×1800 mm (also includes 800×1350, 800×800, all 9mm) Thickness: 9mm Finish: True Stone Glaze 1.0 Design Faces: 4 faces (one set omnidirectional continuous veining, Variation Level V3) Material: Porcelain (water absorption ≤0.5%) Standard: GB/T 4100-2015
Haina Baichuan Luxury Stone Tile 1800×1200×9mm
Specification: 1800×1200 mm (model series K1812) Thickness: 9mm Finish: True Stone Glaze 1.0 Design Faces: 6 faces (one set omnidirectional continuous veining, Variation Level V3) Material: Porcelain (water absorption ≤0.5%) Standard: GB/T 4100-2015
Realm of Clouds and Mist Luxury Stone Tile 1800×1200×9mm
Specification: 1800×1200 mm (model series K1812) Thickness: 9mm Finish: True Stone Glaze 1.0 Design Faces: 4 faces (Variation Level V3) Material: Porcelain (water absorption ≤0.5%) Standard: GB/T 4100-2015
Morris Artistic Picture Tile 1200×1200×10mm
Size: 1200×1200 mm (also includes 1200×600, both 10 mm) Thickness: 10 mm Finish: Artistic Metallic Design Faces: 4 (Variation Level V2) Material: Porcelain (water absorption ≤0.5%) Standard: GB/T 4100-2015
Antique Elegance Weathered Rock Tile 1200×1200×10mm
Size: 1200×1200 mm Thickness: 10 mm Finish: Candy Glaze 1.0 Design Faces: 4 (Variation Level V2) Material: Porcelain (water absorption ≤0.5%) Standard: GB/T 4100-2015
Mystic Charm Stone Marble Tile 1200×1200×9mm
Size: 1200×1200 mm (same series includes 2700×1200×9mm) Thickness: 9 mm Finish: True Stone Glaze 1.0 Design Faces: 6 (Variation Level V2) Material: Porcelain (water absorption ≤0.5%) Standard: GB/T 4100-2015
Milan Impression Travertine Tile 1200×1200×10mm
Size: 1200×1200 mm Thickness: 10 mm Finish: True Stone Glaze 2.0 Design Faces: 6 (Variation Level V2) Material: Porcelain (water absorption ≤0.5%) Standard: GB/T 4100-2015
Cloud Jade Marble Tile 1500×750×10mm
Size: 1500×750 mm (also includes 1800×900, both 10 mm) Thickness: 10 mm Finish: Candy Glaze 4.0 Design Faces: 6 (random omnidirectional continuous veining, Variation Level V2) Material: Porcelain (water absorption ≤0.5%) Standard: GB/T 4100-2015
Serene Elegance Cement Tile 1800×900×10mm
Size: 1800×900 mm (also includes 1500×750, 1200×600, all 10 mm) Thickness: 10 mm Finish: Soft Matte Design Faces: 4 (Variation Level V1) Material: Porcelain (water absorption ≤0.5%) Standard: GB/T 4100-2015
Orlando Sandstone Tile 1800×900×10mm
Size: 1800×900 mm (model segment K1890) Thickness: 10 mm Finish: Dry Grain Soft Matte Design Faces: 6 (Variation Level V2) Material: Porcelain (water absorption ≤0.5%) Standard: GB/T 4100-2015
Laika Imprinted Oak Herringbone Wood-Grain Tile 1800×225×10mm
Specification: 1800×225 mm (same series includes 2700×800 and 1500×750, all 10mm) Thickness: 10mm Process: True Stone Glaze 2.0 Design faces: 4 (variation level V2) Material: Porcelain (water absorption ≤0.5%) Standard: GB/T 4100-2015
North Latitude Cloud Pine Wood-Grain Plank Tile 1500×250×10mm
Specification: 1500×250 mm (also includes 1200×200 and 900×150, all 10mm) Thickness: 10mm Process: Satin Design faces: 15 (variation level V2) Material: Porcelain (water absorption ≤0.5%) Standard: GB/T 4100-2015
Limestone Anti-Slip Floor Tile 1200×600×10mm (R10)
Specification: 1200×600 mm Thickness: 10mm Slip resistance rating: R10 (age-friendly process) Process: Dry-Grain Satin Design faces: 12 (variation level V2) Material: Porcelain (water absorption ≤0.5%) Standard: GB/T 4100-2015
Trani Sandstone Tile 1200×600×10mm
Specification: 1200×600 mm (model segment K0126; same series includes 600×600, etc.) Thickness: 10mm Process: Dry-Grain Satin (10-17° gloss) Design faces: 6 (variation level V2) Material: Porcelain (water absorption ≤0.5%) Slip and wear resistance: Catalog indicates strong slip resistance and wear resistance Standard: GB/T 4100-2015
Distant Mountain Premium Wood Wood-Grain Tile 1200×300×15mm
Specification: 1200×300 mm (same series includes 1200×200×10mm and 900×150×10mm; the 15mm specification is indicated in the catalog for stair treads) Thickness: 15mm Process: Satin Design faces: 29 (variation level V2) Material: Porcelain (water absorption ≤0.5%) Standard: GB/T 4100-2015
Limestone Thin-Body Floor Tile 1200×600×7.8mm (R9)
Specification: 1200×600 mm (same series includes 800×400, etc.) Thickness: 7.8mm Slip resistance rating: R9 Process: Dry-Grain Satin Design faces: 10 (variation level V2) Material: Porcelain (water absorption ≤0.5%) Standard: GB/T 4100-2015
Detroit Cement Tile 600×600×7.8mm
Specification: 600×600 mm (8251 specification series; also includes 1500×750 and 1200×600, all 7.8 mm) Thickness: 7.8 mm Finish: Soft Matte Design faces: 4 faces (variation level V1) Material: Porcelain (water absorption ≤0.5%) Standard: GB/T 4100-2015
Lante Stone Glossy Large Format Tile 800×400×7.8mm
Specification: 800×400 mm (model range K0084, according to the catalog model range) Thickness: 7.8 mm Finish: Glossy (Super Clean Bright Polished) Design faces: 4 faces (variation level V2) Material: Porcelain (water absorption ≤0.5%) Standard: GB/T 4100-2015
Sesame White Landscape Tile 600×1200×18mm
Specifications: 600×1200mm Thickness: 18mm Surface: Matte Process: One texture, multiple colors; parent-child tile matching
Sesame Black Landscape Tile 600×1200×18mm
Specifications: 600×1200mm Thickness: 18mm Surface: Matte Process: One texture, multiple colors; parent-child tile matching
Sesame Grey Landscape Tile 300×600×18mm
Specifications: 300×600mm Thickness: 18mm Surface: Matte Process: One texture, multiple colors; parent-child tile matching
Fuding Black Landscape Tile 600×900×18mm
Specifications: 600×900mm Thickness: 18mm Surface: Matte Process: One texture, multiple colors; parent-child tile matching
Mural Landscape Tile 600×1200×18mm
Specifications: 600×1200mm Thickness: 18mm Surface: Matte Process: One texture, multiple colors
White Wood Grain Dry-Hung Stone Slab 600×1200×18mm (Soft Gloss)
Specifications: 600×1200mm Thickness: 18mm Surface: Soft Gloss
Carrara White Dry-Hung Stone Slab 600×1200×18mm (Glossy)
Specifications: 600×1200mm Thickness: 18mm Surface: Glossy
Portuguese Beige Dry-Hanging Stone Slab 600×1200×18mm (Soft Gloss)
Specifications: 600×1200mm Thickness: 18mm Surface: Soft Gloss
Blue Eye Dry-Hanging Stone Slab 600×1200×18mm (Matte)
Specifications: 600×1200mm Thickness: 18mm Surface: Matte
Terrazzo Rustic Tile 600×1200×9.1mm
Specifications: 600×1200mm Thickness: 9.1mm (CE tested) Surface: Matte Process: One stone with four faces, interlocking tiles Water absorption: 0.05% (individual value 0.04%~0.06%) (CE tested) Breaking strength: 2309N (standard ≥1300N) (CE tested) Modulus of rupture: average 52.5N/mm² (individual 51.2~54.1, standard ≥35) (CE tested) Abrasion resistance: Grade 4 / 2100 revolutions (CE tested) Thermal shock resistance, crazing resistance, frost resistance: Pass (CE tested) Standard implemented: EN 14411:2016 (CE, (EU) No.305/2011)
Fine Sandstone Rustic Tile 600×1200×9.1mm
Specifications: 600×1200mm Thickness: 9.1mm (CE tested) Surface: Matte Process: One stone with four faces, interlocking tiles Water absorption: 0.05% (individual value 0.04%~0.06%) (CE tested) Breaking strength: 2309N (standard ≥1300N) (CE tested) Modulus of rupture: average 52.5N/mm² (individual 51.2~54.1, standard ≥35) (CE tested) Abrasion resistance: Grade 4 / 2100 revolutions (CE tested) Thermal shock resistance, crazing resistance, frost resistance: Pass (CE tested) Standard implemented: EN 14411:2016 (CE, (EU) No.305/2011)
Xibei Rock Rustic Tile 600×1200×9.1mm
Specifications: 600×1200mm Thickness: 9.1mm (CE tested) Surface: Matte Process: One stone with six faces, interlocking tiles Water absorption: 0.05% (individual value 0.04%~0.06%) (CE tested) Breaking strength: 2309N (standard ≥1300N) (CE tested) Modulus of rupture: average 52.5N/mm² (individual 51.2~54.1, standard ≥35) (CE tested) Abrasion resistance: Grade 4 / 2100 revolutions (CE tested) Thermal shock resistance, crazing resistance, frost resistance: Pass (CE tested) Standard implemented: EN 14411:2016 (CE, (EU) No.305/2011)
Venice Stone Rustic Tile 600×1200×9.1mm
Specifications: 600×1200mm Thickness: 9.1mm (CE tested) Surface: Matte Process: One stone with four faces Water absorption: 0.05% (individual value 0.04%~0.06%) (CE tested) Breaking strength: 2309N (standard ≥1300N) (CE tested) Modulus of rupture: average 52.5N/mm² (individual 51.2~54.1, standard ≥35) (CE tested) Abrasion resistance: Grade 4 / 2100 revolutions (CE tested) Thermal shock resistance, crazing resistance, frost resistance: Pass (CE tested) Standard implemented: EN 14411:2016 (CE, (EU) No.305/2011)
Straight-Grain Grey Travertine Rustic Tile 750×1500×8.9mm
Specification: 750×1500mm Thickness: 8.9mm (CE tested) Surface: Matte Process: 4 faces per design, matching tiles Water absorption: 0.04% (individual values 0.03%~0.06%) (CE tested) Breaking strength: 2534N (standard ≥1300N) (CE tested) Modulus of rupture: average 49.0N/mm² (individual 47.9~50.6, standard ≥35) (CE tested) Abrasion resistance: Class 4 / 2100 revolutions (CE tested) Thermal shock resistance, crazing resistance, frost resistance: Pass (CE tested) Standard: EN 14411:2016 (CE, (EU) No.305/2011)
Spanish Sandstone Rustic Tile 750×1500×8.9mm
Specification: 750×1500mm Thickness: 8.9mm (CE tested) Surface: Matte Process: 4 faces per design Water absorption: 0.04% (individual values 0.03%~0.06%) (CE tested) Breaking strength: 2534N (standard ≥1300N) (CE tested) Modulus of rupture: average 49.0N/mm² (individual 47.9~50.6, standard ≥35) (CE tested) Abrasion resistance: Class 4 / 2100 revolutions (CE tested) Thermal shock resistance, crazing resistance, frost resistance: Pass (CE tested) Standard: EN 14411:2016 (CE, (EU) No.305/2011)
Time Imprint Rustic Tile 750×1500×8.9mm (Soft Gloss)
Specification: 750×1500mm Thickness: 8.9mm (CE tested) Surface: Soft Gloss Process: 6 faces per design Water absorption: 0.04% (individual values 0.03%~0.06%) (CE tested) Breaking strength: 2534N (standard ≥1300N) (CE tested) Modulus of rupture: average 49.0N/mm² (individual 47.9~50.6, standard ≥35) (CE tested) Abrasion resistance: Class 4 / 2100 revolutions (CE tested) Thermal shock resistance, crazing resistance, frost resistance: Pass (CE tested) Standard: EN 14411:2016 (CE, (EU) No.305/2011)
Molita Rustic Tile 600×1200×9mm (R11 Anti-slip)
Specification: 600×1200mm Thickness: 9mm (series nominal) Surface: Matte Slip resistance: R11 (catalog designation, German standard slip resistance rating) Process: 6 faces per design (non-continuous veining)
Beno Beige Polished Glazed Tile 800×800×9.1mm
Specification: 800×800mm Thickness: 9.1mm (CE tested) Surface: Glossy Process: 6 faces per design, matching tiles Water absorption: 0.04% (individual values 0.02%~0.05%) (CE tested) Breaking strength: 2406N (standard ≥1300N) (CE tested) Modulus of rupture: average 55.1N/mm² (individual 53.6~57.7, standard ≥35) (CE tested) Abrasion resistance: Class 4 / 6000 revolutions (CE tested) Thermal shock resistance, crazing resistance, frost resistance: Pass (CE tested) Standard: EN 14411:2016 (CE, (EU) No.305/2011)
Finland Grey Polished Glazed Tile 600×1200×9.1mm
Specification: 600×1200mm Thickness: 9.1mm (CE tested) Surface: Glossy Process: 4 faces per design, matching tiles Water absorption: 0.05% (individual values 0.04%~0.06%) (CE tested) Breaking strength: 2309N (standard ≥1300N) (CE tested) Modulus of rupture: average 52.5N/mm² (individual 51.2~54.1, standard ≥35) (CE tested) Abrasion resistance: Class 4 / 2100 revolutions (CE tested) Thermal shock resistance, crazing resistance, frost resistance: Pass (CE tested) Standard: EN 14411:2016 (CE, (EU) No.305/2011)
Hepburn Grey Polished Glazed Tile 600×1200×9.1mm (Soft Gloss)
Specification: 600×1200mm Thickness: 9.1mm (CE tested) Surface: Soft Gloss Process: 6 faces per design, matching tiles Water absorption: 0.05% (individual values 0.04%~0.06%) (CE tested) Breaking strength: 2309N (standard ≥1300N) (CE tested) Modulus of rupture: average 52.5N/mm² (individual 51.2~54.1, standard ≥35) (CE tested) Abrasion resistance: Class 4 / 2100 revolutions (CE tested) Thermal shock resistance, crazing resistance, frost resistance: Pass (CE tested) Standard: EN 14411:2016 (CE, (EU) No.305/2011)
Black Gold Flower Polished Glazed Tile 800×800×9.1mm
Size: 800×800mm Thickness: 9.1mm (CE tested) Surface: Glossy Technique: Random combination Water absorption: 0.04% (individual values 0.02%~0.05%) (CE tested) Breaking strength: 2406 N (standard ≥1300 N) (CE tested) Modulus of rupture: Average 55.1 N/mm² (individual 53.6~57.7, standard ≥35) (CE tested) Abrasion resistance: Class 4 / 6000 revolutions (CE tested) Thermal shock resistance, crazing resistance, frost resistance: Pass (CE tested) Standard applied: EN 14411:2016 (CE, (EU) No.305/2011)
Oriental Calacatta Polished Glazed Tile 750×1500×8.9mm
Size: 750×1500mm Thickness: 8.9mm (CE tested) Surface: Glossy Technique: Six-face design, mother-and-child tiles Water absorption: 0.04% (individual values 0.03%~0.06%) (CE tested) Breaking strength: 2534 N (standard ≥1300 N) (CE tested) Modulus of rupture: Average 49.0 N/mm² (individual 47.9~50.6, standard ≥35) (CE tested) Abrasion resistance: Class 4 / 2100 revolutions (CE tested) Thermal shock resistance, crazing resistance, frost resistance: Pass (CE tested) Standard applied: EN 14411:2016 (CE, (EU) No.305/2011)
Liya Beige Polished Glazed Tile 900×1800×9.1mm
Size: 900×1800mm Thickness: 9.1mm (CE tested) Surface: Glossy Technique: Four-face design, mother-and-child tiles Water absorption: 0.05% (individual values 0.04%~0.06%) (CE tested) Breaking strength: 2254 N (standard ≥1300 N) (CE tested) Modulus of rupture: Average 47.3 N/mm² (individual 46.3~48.6, standard ≥35) (CE tested) Abrasion resistance: Class 4 / 6000 revolutions (CE tested) Thermal shock resistance, crazing resistance, frost resistance: Pass (CE tested) Standard applied: EN 14411:2016 (CE, (EU) No.305/2011)
Multicolor Stone Vitrified Tile 600×1200mm (Large-Particle Through-Body)
Size: 600×1200mm Thickness: 9~13mm (range indicated in the vitrified tile series catalog) Surface: Glossy Technique: Large-particle through-body, terrazzo texture, random combination
Nebula Stone Cream White Vitrified Tile 600×1200mm (Speckled Through-Body)
Size: 600×1200mm Thickness: 9~13mm (range indicated in the vitrified tile series catalog) Surface: Glossy Technique: Speckled through-body, terrazzo texture, random combination
New Amazon Beige Vitrified Tile 800×800×9.1mm (Double-Charge)
Size: 800×800mm Thickness: 9.1mm (CE tested) Surface: Glossy Technique: Double-charge, terrazzo texture, mother-and-child tiles, random combination Water absorption: 0.04% (individual values 0.02%~0.05%) (CE tested) Breaking strength: 2406 N (standard ≥1300 N) (CE tested) Modulus of rupture: Average 55.1 N/mm² (individual 53.6~57.7, standard ≥35) (CE tested) Abrasion resistance: Class 4 / 6000 revolutions (CE tested) Thermal shock resistance, crazing resistance, frost resistance: Pass (CE tested) Standard applied: EN 14411:2016 (CE, (EU) No.305/2011)
Italian Wood Grain Vitrified Tile 800×800×9.1mm
Size: 800×800mm Thickness: 9.1mm (CE tested) Surface: Glossy Technique: Random combination Water absorption: 0.04% (individual values 0.02%~0.05%) (CE tested) Breaking strength: 2406 N (standard ≥1300 N) (CE tested) Modulus of rupture: Average 55.1 N/mm² (individual 53.6~57.7, standard ≥35) (CE tested) Abrasion resistance: Class 4 / 6000 revolutions (CE tested) Thermal shock resistance, crazing resistance, frost resistance: Pass (CE tested) Standard applied: EN 14411:2016 (CE, (EU) No.305/2011)
Iceland Crackle Ceramic Wall Tile 300×600×8.5mm
Size: 300×600mm Thickness: 8.5mm (catalog) Surface: Glossy Process: 4-face design Water absorption: 18.3% (individual value 18.0%~18.6%, Group B III) (CE tested) Breaking strength: 1170N (standard ≥600N) (CE tested) Modulus of rupture: average 27.8N/mm² (standard ≥12) (CE tested) Abrasion resistance: Grade 4 / 2100 revolutions (CE tested) Thermal shock resistance, crazing resistance, frost resistance: Pass (CE tested) Standard: EN 14411:2016 (CE, (EU) No.305/2011) Water absorption group: EN 14411 Group B III (Eb>10% glazed tiles)
Galaxy White Ceramic Wall Tile 300×300×8.5mm
Size: 300×300mm Thickness: 8.5mm (catalog) Surface: Glossy Process: 6-face design Water absorption: 17.9% (individual value 17.5%~18.4%, Group B III) (CE tested) Breaking strength: 941N (standard ≥600N) (CE tested) Modulus of rupture: average 23.9N/mm² (individual 22.5~25.2, standard ≥12) (CE tested) Abrasion resistance: Grade 4 / 2100 revolutions (CE tested) Thermal shock resistance, crazing resistance, frost resistance: Pass (CE tested) Standard: EN 14411:2016 (CE, (EU) No.305/2011) Water absorption group: EN 14411 Group B III (Eb>10% glazed tiles)
Jiangnan Impression Fine Porcelain 400×800mm (Matte)
Size: 400×800mm Thickness: 7.4~8.8mm (range specified in Fine Porcelain Series catalog) Surface: Matte Process: 4-face design
Si'an Oak Wood-Grain Strip Tile 196×1200mm (Matte)
Size: 196×1200mm Surface: Matte Process: mother-and-child tiles, random combination of 12 faces Water absorption: 0.03% (individual value 0.02%~0.04%) (CE tested) Breaking strength: 2798N (standard ≥1300N) (CE tested) Modulus of rupture: average 59.7N/mm² (individual 55.6~62.8, standard ≥35) (CE tested) Abrasion resistance: Grade 3 / 1500 revolutions (CE tested) Thermal shock resistance, crazing resistance, frost resistance: Pass (CE tested) Standard: EN 14411:2016 (CE, (EU) No.305/2011)
Si'an Oak Wood-Grain Strip Tile 146×900mm (Matte)
Size: 146×900mm Surface: Matte Process: mother-and-child tiles, random combination of 12 faces Water absorption: 0.05% (individual value 0.04%~0.06%) (CE tested) Breaking strength: 2636N (standard ≥1300N) (CE tested) Modulus of rupture: average 58.1N/mm² (individual 54.3~62.3, standard ≥35) (CE tested) Abrasion resistance: Grade 3 / 750 revolutions (CE tested) Thermal shock resistance, crazing resistance, frost resistance: Pass (CE tested) Standard: EN 14411:2016 (CE, (EU) No.305/2011)
Qingfeng Mingyue Sintered Stone 900×1800×9.1mm (Soft Matte)
Size: 900×1800mm Thickness: 9.1mm (CE tested) Surface: Soft Matte Process: 6-face design, random combination Water absorption: 0.05% (individual value 0.04%~0.06%) (CE tested) Breaking strength: 2254N (standard ≥1300N) (CE tested) Modulus of rupture: average 47.3N/mm² (individual 46.3~48.6, standard ≥35) (CE tested) Abrasion resistance: Grade 4 / 6000 revolutions (CE tested) Thermal shock resistance, crazing resistance, frost resistance: Pass (CE tested) Standard: EN 14411:2016 (CE, (EU) No.305/2011)
Carrara Sintered Stone 1200×2400mm (Glossy)
Specification: 1200×2400mm Surface: Glossy Process: Eight faces per stone, random combination
Liuchuan Stone Eco Flexible Ceramic 600×1200mm
Specification: 600×1200mm Thickness: 1–6mm (range indicated in the flexible ceramic series catalog) Surface: Stone-like texture
Gypsum plasterboard 1220×2440×9.5mm (Regular Type)
Dimensions: 1220×2440×9.5mm (length tolerance 0 mm, width tolerance -2 mm, thickness tolerance +0.2 mm, diagonal difference 1mm) Mass per unit area: 6.5 kg/m² (GB/T 9775 requirement ≤9.5) Breaking load: longitudinal average 503N/minimum 474N (requirement ≥400/≥360); transverse average 256N/minimum 236N (requirement ≥160/≥140) Tapered edge: width 48mm, depth 1.7mm (requirement 30~80 / 0.6~1.9) Hardness: end 143N, edge 142N (requirement ≥70) Impact resistance: no radial cracks on the back of the board; no separation between face paper and core Deflection under moisture: 1mm Radionuclide limits: Class A (internal exposure index 0.0, external exposure index 0.0); production, sales and use are not restricted Packaging: 100 sheets/pallet or 80 sheets/pallet
Gypsum plasterboard 1200×2400×12mm (Regular Type)
Dimensions: 1200×2400×12mm Standard: GB/T 9775-2008 Regular Type; radionuclide limits comply with GB 6566-2010 Class A Certificate specification options: thickness 9.5/12/15mm; sizes 1220×1830, 1220×2440 Type test measured values for 9.5mm product in the same series (No.2510726): mass per unit area 6.5 kg/m², longitudinal breaking load average 503N, transverse average 256N, tapered edge width 48mm/depth 1.7mm Packaging: 100 sheets/pallet or 80 sheets/pallet
Gypsum plasterboard 1200×2400×9.5mm (Moisture-Resistant Type)
Dimensions: 1200×2400×9.5mm Standard: GB/T 9775-2008 Moisture-Resistant Type Certificate specification options: thickness 9.5/12mm; sizes 1220×1830, 1220×2440 Packaging: 100 sheets/pallet or 80 sheets/pallet
Gypsum plasterboard 1200×2400×12mm (Moisture-Resistant Type)
Dimensions: 1200×2400×12mm Standard: GB/T 9775-2008 Moisture-Resistant Type Certificate specification options: thickness 9.5/12mm; sizes 1220×1830, 1220×2440 Packaging: 100 sheets/pallet or 80 sheets/pallet
Gypsum plasterboard 1220×2440×9.5mm (Water-Resistant Type)
Dimensions: 1220×2440×9.5mm Standard: GB/T 9775-2008 Water-Resistant Type Certificate specification options: thickness 9.5/12/15mm; sizes 1220×1830, 1220×2440 Packaging: 100 sheets/pallet or 80 sheets/pallet
Gypsum plasterboard 1220×2440×12mm (Water-Resistant Type)
Dimensions: 1220×2440×12mm Standard: GB/T 9775-2008 Water-Resistant Type Certificate specification options: thickness 9.5/12/15mm; sizes 1220×1830, 1220×2440 Packaging: 100 sheets/pallet or 80 sheets/pallet
Light Steel Keel – Wall Vertical Stud QC50×45×0.6mm
Dimensions: QC 50×45×0.6mm (height 50 × flange width 45 × steel sheet thickness 0.6) Length: 3000mm Zinc coating weight, both sides: 128 g/m² (GB/T 11981 requirement ≥100) Salt spray resistance: ≥48h Mechanical properties: impact residual deformation 9.8mm (requirement ≤10.0); residual deformation under static load 0.1mm (requirement ≤2.0) Matching horizontal keel: QU 50×35×0.6
Light Gauge Steel Channel - Wall Track (Top and Floor Track) QU50×35×0.6mm
Specification: QU 50×35×0.6 mm (height 50 × flange width 35 × steel sheet thickness 0.6) Length: 3000 mm Double-sided zinc coating weight: 131 g/m² (specification ≥100) Salt spray resistance: ≥48 h Mechanical properties: residual deformation after impact 9.8 mm (specification ≤10.0); residual deformation under static load 0.1 mm (specification ≤2.0) Matching stud: QC 50×45×0.6
Light Gauge Steel Channel - Wall Stud QC75×45×0.6mm
Specification: QC 75×45×0.6 mm (height 75 × flange width 45 × steel sheet thickness 0.6) Length: 3000 mm Standard: GB/T 11981-2024 (the quality assurance certificate states that it has been tested and complies; product qualified)
Light Gauge Steel Channel - Ceiling Main Channel DC60×27×1.2mm
Specification: DC 60×27×1.2 mm (width 60 × height 27 × steel sheet thickness 1.2) Double-sided zinc coating weight: 141 g/m² (specification ≥100) Salt spray resistance: ≥48 h Mechanical properties: deflection under static load (1000 N load) 1.4 mm (specification ≤4.0); residual deformation under static load 0.0 mm (specification ≤1.0)
Light Gauge Steel Channel - Ceiling Furring Channel DC50×19×0.5mm
Specification: DC 50×19×0.5 mm (width 50 × height 19 × steel sheet thickness 0.5) Length: 3000 mm Double-sided zinc coating weight: 122 g/m² (specification ≥100) Salt spray resistance: ≥48 h Mechanical properties: deflection under static load 3.9 mm (specification ≤5.0); residual deformation under static load 0.1 mm (specification ≤1.0)
Light Gauge Steel Channel - Ceiling Edge Trim DL20×30×20×0.4mm
Specification: DL 20×30×20×0.4 mm (L-shaped section, flange width 20/30 × steel sheet thickness 0.4) Double-sided zinc coating weight: 123 g/m² (specification ≥100) Salt spray resistance: ≥48 h